liners

I've just had six liner made to suit the 2001-2003 FE400e and similar FS also six liners for the 2001-2004 FE501e. so fear not being covered for these for a little while! they were made of solid billet aluminium and finished with a hone to bring them out to size and perfecly...

anyone else had this trouble? I have had three owners over the years with broken liners, they break under the neck on the left hand side. I've just opened one up and found that the bottom groove has been rubbing hard and instead of breaking, it wore a groove in the wall in the area of...

I want to buy a cylinder head (with all 4 walves), a 99,94 mm cylinder sleeve (liner) and a connecting rod for my 2004 fe 450. Second hand or brand new. Anybody can offer me these parts or any address that I can shop online? Thanks :)

Hi Wondering if anyone may have any ideas on tracking down any of those " BIG BORE " pistons kits for 2004/2005 FS/FE650 Engine, and liners ,that JBS racing use to have available . ( or other possible supplier such as Arias or Mahle or JE ? ).........and aftermarket rods such as Carrillo ? (...

Hi All, I am rebuilding a 2005 FS650 motard that looks like it had been allowed to breath in some sand/grit of some kind. Liner is scored to the point of just being able to pick up the marks with a finger nail and the piston has very small hard, what looks like sand grains, embedded in the...

Hi all, Heres the story: 03 FE650- damaged piston & liner from pieces of main bearing embedded in piston skirt scoring liner. Potential fix- use a 8551DA (99.94mm), DB(99.95) or DC(99.96mm) Wossner piston as required to allow for correct clearance honing depending on bore dia. required...