liner

About a Month ago, with the help of an engineer I found out what was making the liners crack on husabergs circa 2004-2008. it is a sharp lip inside the top of the cases. (see the photo below). The Motor Cyle most susceptible to this appears to be the 2004 FE/FC/FS450e. I don't think...

Hello Any one know if a 470 cylinder liner will work on a 450? the liners seem identical except the bottom cut out. will the 470 liner have a interference with the 450 balancer or the crank? https://pasteboard.co/JnoP8Z4.jpg

Hi guys, as far as I know there is a change in liner coating around model year 2003? Am I right or is there more precise and specific information. The reason I´m asking, I have the opportunity to buy a used 501 liner, but think to remember that to a certain model year it is very expensive...

Hi to all, After oil & antifreeze change, I rode bike for 20 mins and it shut down, rear wheel locked. When trying to kickstart it, kickstarter was not hard (low compression). Managed to start it, white smoke was coming from exhaust. When engine is opened, piston and cylinder where damaged...

Hi all, I finally have all my new engine parts in front of me and as I was taking my new cylinder liner out of the packaging for the first time (I've had it for months now) I noticed that it is marked "3". Does this refer to the sizing? I only see reference to size 1 and 2 in the manual...

Not my item, but I just saw this on EBay. Cheap as buggery, someone get it quick! No 650 liners, I've already asked :P Husaberg Cylinder Liner 100mm Brand NEW | eBay

Hi! I have a husaberg fe550 -04 and I have a crack in the cylinder liner so I'm going to replace it and the piston.. But since I'm going to disassemble the engine, I was wondering what other parts u customarly replace when doing this type of job? Barrings and so on? I have one other question as...

Hello everybody, I have some toughts about making my own liner for my Husaberg fs650 in a CNC-lathe. Does anybody know anything about this? Has anybody machined anything similar? Do you know wich material that is good to use?

as the titles says, does anyone have a 2003 501cc liner in good condition .. the would like to sell ? if so what cost ?

Hi guys.I just have bought husaberg 501 2003,but engine has been changed to 390.Piston and liner have worn out.Can I change my bike cc if I put bigger liner and piston?Maybe there will fit 2001 husaberg FX470 E FC470 piston and liner?Sorry for my silly question,but I am new in Husaberg world :)

g'day all long time lurker 1st time poster great site learnt a lot.but i have a question can i use a 05 450 liner in a 05 550 what are the differences if any.i dont want to change it into a 450 or anything.i just got a 450 liner real cheap.thanks in advance. cheers

I bought some parts from a dealer that went out of business and I have a 92MM Piston and Liner. Both are new and still in the box but I'm not that versed on older Husabergs. 92MM??? has to be for a 400 conversion. Is that correct? Both parts are special order from Berg and not kept at the...

I was wondering if it was possible to bore out a warped liner. would it cause it to warp easier because the wall thickness would'nt be the same. I'm just trying to figure out if my old liner would be a good candidate for a big bore kit. It is warped by 0.211mm on the top and 0.533mm on the bottom.

Hi I need a new piston for my '08 FE550. What make is the standard piston that Husaberg use? Are Wossner pistons any good? They seem it from what I've read. They are also much cheaper than the price I've been quoted from a dealer for an OEM piston- over £250!! Seen the Wossner pistons at...

hello, Is there anybody who can tell me : How much clearence there may be between Piston and Liner,because I have the impression it is kind loose,because the local dealer says it is normal. Bike is a 650 2004. Thanks Madero

Does anyone out there know what type of coating the 2001- cylinder liner has? Or if anybody has tried to get the liner refurbished? /Dr_C

Hi! Thanks for answering my earlier question!Now I have a new one! Are there any tricks for dismantling the cylinder liner?Or do I just losen the four bolts and pull it up. Is it possible to mantle a thermostat wich is on the 05-models ,on my 400 -03? Hope it´s understandable! -Kind...

Hi Guys As you know I'm working on a 750cc Husaberg conversion. I have stripped the donor/victim engine and measured all the bits up. I am running a specially made 105mm piston, and a longer stroke. This means that I will have to bore the liner and pack the head up. I have a foundry and...