lhrb

This bike has a repurposed Magura clutch master cylinder connected directly to it's rear Brembo caliper. Has worked fine for many years. As of today, lever goes to the handlebar with no effect. Can't push fluid up through the caliper to the Magura. Can't figure out what's happening. Anyone...

Anyone mounted one on 2009+ FE390 (or similar)? The space underneath the shock mount is very tight with the mid-pipe in the way, sort of. So I am just wondering what cable routing have you settled for and have you had any issues keeping the cable from the pipe? Thanks

For the love of "who ever you're into"! Could somebody be a sweetheart and point me in the right direction to purchase a complete rear brake conversion kit for my 2008 FE450E. I don't want a stinkin foot lever. Just a left hand rear brake. Thank you. YOU R AWESOME!! 2014 TE300 208 FE450E I party

Did a search and couldn't find an answer. How did you guys block off the clutch slave cylinder after doing the lhrb conversion? Did you just get a shorter banjo bolt and do it up or did you remove the cylinder all together and fit a blanking plate?

I'm looking for the measurement of the brake hose that i will need for a LHRB on my 01 fe650? If someone has done this conversion, i would appreciate your input. I'm going right from the clutch m/c to the rear caliper. Thanks in advance K

I installed the Rekluse Pro clutch, and did the straight clutch to rear brake conversion by plumbing the clutch hose to the rear brake hose. It works great. I have a question about how to block off the clutch. I simply put a piece of tubing over the stock banjo bolt to cover the holes and...

I'm running a Revloc clutch and am using the mineral oil magura clutch master with a braided steel line straight to my rear caliper. I cannot, for the life of me, get this thing to bleed! I've tried reverse bleeding with pressure using a big syringe, regular bleeding, gravity bleeding, etc...

I'm looking at making the switch to LHRB. Last night I found that some of you have had luck with using the stock Magura clutch master. After extended use, have you had any problems with seals due to switching from mineral oil to brake fluid? What's the best way to flush out the old mineral...