leg

Man it took some effort to make this happen, and finally, its there! Didnt mean to make you throw up though :D

I am going to make myself some leg stabilizers to try to combat my arm pump issues. I find myself needing to sit often due to tired arms and hands. I have bar risers but they aren't doing the trick either. There are some commercially available options such as: STEGZ Moto Technologies -...

The day started very well. Beautiful weather, autumn, warm. Decided to ride near St. Petersburg. Went away into the forest, where there are no people and machines. As usual, on a flat road, my son too much pushed the front brake that it drifted and he fell. Get up, he could not...

I just picked up a 2011 FE 570. She is a pretty bad *** machine if I do say so myself. I also picked up some gear including tech 7 boots some pants helmet check protector gloves. I have been riding bike for 15 years but this is my first dirt bike. I have been wanting to get into something...

New FE 570 and was installing a set of Seal Savers as I had great success with them on my KTM. When sliding down the plastic fork protector I noticed how the plastic fork protector and the Seal Saver were rubbing - just a matter of time before the Seal Saver wuld be shredded and interfer with...

Hi, I had the front wheel off my 08 FE550 this week and did not pay enough attention to what the spacing of everything had looked like while disassembling Everything went back together fine with the brake disk lined up etc. However, there is some of the axle exposed on the riders right side...

Hi all, new to Husabergs and this forum and like most of you i seem to be having spark issues making starting a real nightmare. I've just bought an FS650e 2002 and having checked some of the other posts have checked my stator resistance but have seen different resistances quoted , its a SEM...

Hi All, Finally got around to pull the front out of the Berg today, the damage is only to one folk leg slider of which I have one coming from the Uk. The thing is how does one remove the aluminum casting on the bottom of the slider the leg I have coming is coming with out the casting...

I have a problem of gripping the bike the bike with the legs and always wind up pulling with my arms when standing. This is due to the wide tank at the end and lack of side panels where other bikes have the air filter box. Here are my questions. Has anyone heated up the tank and made it...

HI YET AGAIN ANY HELP WOULD BE GREATLY APPRECIATED I HAVE A 03 650. WHEN IT COMES TO STARTING IT IN THE MORNING (AS I USE IT FOR WORK) I PUT THE CHOKE ON(DELLORTO CARB) PUT THE ENGINE TO THE CORRECT POSITION TO START IT AND WITH A ALMIGHTY KICK ATTEMPT TO START IT . THE ENGINE WILL HAVE A...

Hey Velo Should we call ya peg leg? Heard ya got broke up. Hope it heals quick with no long lasting problems. Man I know where you are right now. Ive had 7 surgeries form bikes. think I woulda learned by now. Remember the fun you have had and forget about the pain. hope your up and around...

I have an 03 FE400 for which I sent off the suspension to Dick's Racing last year. They did the complete APS on the forks. I love them; way more compliant than stock and more adjust-ability for variations in riding. LOVE THEM! I just bought an 05 FE450E, and it has the factory option (?) of...

Sorry if this has been raised before - new to this forum. Has any one got a fix for the starter motor on the 99 FE400E? It seems to be seized/not getting any current. When it was working, it didn't seem to have any enough power to spin the engine, and it gradually got slower to the point...

hey there guys having a ongoing problem with my 99 fe 600 the left leg allways seems to leak i have had the seal replaced about 6 months ago and the bike is fitted with gators and was not ridden for 3 months of that time started leaking when i had it stored in the garage i have allwyas bled them...