leaks

I’ve just finished rebuilding my 96 FE350 and went for the first ride today. I noticed oil leaking from the gasket on the bottom end of the cyl. I first torqued the studs to 44nm then realized from another thread on this forum that I should be torquing to 46ftlbs. I’m currently torqued to...

Hi Just a quick note about some 2013 FE350 issues. My 350 seemed to overheat very easily on any slow uphill or single track. Then it would start steaming so obviously it was boiling but the fan still wasn't on. So after a bit of testing showed that the thermo switch was not really opening...

Hey guys :cheers: i have a big problem with my Husaberg FE 570 2009. My Husa leaks coolant from that little hole at the water pump cover. I tried a new 2.0 bar cover for the radiator... but it didnt help. I changed the water pump seals... didnt help. I cant find the damn problem :/ hope you...

Hi Bergers, Thought I'd start another thread on this, although there ar already numerous ones on UHE already. As I guess many of you are aware already if you have been reading http://www.husaberg.org/index.php?name= ... torder=asc I have had a few issues with WP leaks and others on my 07 650...

Are any other dealers out there coming accross oil leaks with the 07 Bergs....our 06s, no problem, 07s are a different story...sold a new fe550e to a customer and water pump shaft is doing more than seeping (sent updated seal which should have been installed from the factory anyway), also same...

Hi Gang, I've got a few hours on my 07 FE650 now, about 10 and 4 oil changes. For what its worth, the water pumps still ooze just like my 98 501 and one I haven't heard of before is the crankcase centre oozes into the bash plate for a nice conjealed oil dust crud. Does anyone else have any...

I supposedly had this fixed like 2 Months ago (leak1) by my berg dealer this is the worst it has got as I have just done a two day 600k desert ride. Please let me know if this is normal etc The second leak has seemed to be there since day one of owning my new berg 6 months ago...

I know this sounds simple and easy. I got my suspension back from ****'s Racing on Tuesday and installed it. I put fuel in the tank and tried to start the bike. My son says " There's something leaking under there." I look and gas is flowing out the overflow tube. So I close the petcocks, drain...