leak

Hi .. is there anyway just too top up fork oil on bike .. Got a slight leak . But if can top up for now this would be great

I am a newbie and have read through every thread I can find on this topic and saw a few YouTube videos. I was so excited to get this bike and before I could even ride it noticed the oil was milky. I have a few questions that have not been answered in the threads I have read and the videos I...

Hi guys my bike starts leaking by the weep hole behind the water pump, it doesn't stop leaking when engine warm up a little. i read several foruns about the seal, but will be this case? i remove the water pump and didn't notice any failure on the seal (visual) only notice that the seal is in...

Hi, I have recently bought a second hand Husaberg FE 501. Unfortunately it has a fuel leak when running. I have traced the origin of the leak to the topside of the throttle body. I did this by dismantling the bike to get the throttle body off then reconnecting the tank and blipping the...

Went for a nice long ride over the weekend. At the beginning, everything was nice and clean. Then I started to notice a mist of oil on the right side of the engine. It was VERY difficult to pinpoint the source of the leak. The entire right side seemed to have a coating of oil from the valve...

...another leak :eek:

Hi, trying to iron out some it's n bits on my 2009 450 FE. Traced an irritating oil leak to the rocker cover. But contrary to my initial thoughts that it was weeping out of the bottom left it now seems it's starting in the seam on the left hand side a half way up. I can actually see it bubbling...

Hello fellow husaberg riders, I own a husaberg fs650(e) 2006 model. Lately i noticed there was a little oil leak from the little hole where the water pump is (see picture). I looked in the manual and replaced the O-ring as subscribed. After mounting again and a test drive, there was still...

Water pump weep hole dripping coolant while bike on stand after very hot day. Bike not started. Any one else had this. Drip not from radiator over flow tube but from weep hole.

During my ride last weekend my 2002 FE650 developed a dripping leak from the area of the left petcock above the exhaust pipe. The leak stopped after about 20 minutes. This has happened once in the past so I removed the petcock and added a gasket with sealant which seemed to fix the problem...

Hi pro, s! Found coolant leaking today when I had The bike running on idle. Only after a minute or so it was dripping from what I can see a bolt for transmission cover just in front/underneat The waterpump housing. Anybody know if it's a bad sealing/bushing that resigned? // The Husa rookie...

Hi guys got this allen bolt thats in bottom of engine case/sump on my 2002 650 and its leaking oil. Is it some extra drain plug or something?i have tried searching google and cant seam to find what it is anywhere. Cheers...

Anyone ever know oil level viewing window to leak oil?

Hey. Long story short. Two of four fuel pressure regulator plastic threads are stripped. Any ideas how to fix this? Maybe replacing the treads with nut type inserts like this one?

Howdy All, Looking into older threads, on the forum, this is a inherent problem with 70 deg bergs. But there is no definitive solution posted. So I thought I would tap into any thoughts. Oil leaking from where the shift shaft spline comes out. The shift shaft has a shaft seal ring (ktm...

Hi Guys A little story 1st then my problem. The 'berg has been virtually unridden this year, so when a mate said "Lets go for a ride this Sunday" I said "Great!". It had spent probably 4 months under a cover in my garage. My mate was pretty excited too and I found out later he had spent...

Guys, In trying to sort out my rocker arm/valve issue, I came across what looks like an oil leak at the top of my ignition cover, where the wires enter the housing. Here are some photos: Imgur: The most awesome images on the Internet http://i.imgur.com/RL5kINZ.jpg Should this be as...

I bought a 1997 Fe 501 e Husaberg that has brown oil indicating a head gasket leak so I replaced it with a new one and after I got it tightened down and put back together I noticed it was leaking to the outside again. ahh annoying! What should I do? buy a new gasket and try again? The only thing...

Hi all Want to share this experience with you guys, on my FE400-02 I was having an oil leak from the sprocket shaft, and it was making a mess. A bit irritating :mad: First I thought it was the seal, and changed it, but it wasn't, the mess continued ... :mad: Looked again and noticed...

My tank has a leak from the screw insert for the exhaust bracket. Any experience in fixing this. I'm selling the tank and would like to fix it before hand. Cheers Ross