lc4

Just thought I'd write this journey for anyone with a 17mm axle LC4 Front wheel doing a conversion to 20mm and hopefully this will prevent a few trial and error bits along the way. To convert the 17mm front wheel it is intensive but this is what I've learnt... The speedo side bearing is (from...

Hey folks Bit of confusion with the front LC4 wheel fitting to my '08 Berg. Bought the KTM spindle reducer kit + spindle and nut. But the wheel itself has some unexpected diameters. In the parts fiche for a 2002 LC4 640 the bearings, seals and spacers are exactly the same on both sides...

Hi guys. Any of you has experience with Oberon clutch slave cylinder. I wondering if it will fit my 2011 FE570 . Thank you for any respond cheers Pixelman KTM

Hey everyone, I keep damaging the chinsy factory chain guide on my old 97 501e. I have read a lc4 guide will work as a upgrade. Question is will a aftermarket guide for a lc4 also work ?

Hi all I'm looking at a secondhand set of ktm lc4 dirt wheels from a 2003 bike I know 2003 is the cut off from the axel change so will they fit my 2004 fs650e ?? Thanks sorry if this has been asked a thousand times I have tryed to search but not found what I'm looking for . Daz.

How hard do you think it would be? Would the frame handle the added weight?. Just a thought. Peyton

Hi Just to let everyone out there know that I successfully fitted a front end from a 2006 kTM Lc4 660 without any need for modification. The Bearings fitted perfectly and the stem is about 2mm longer than the old bergs so I fitted a shim to take up the slack. All seems to working so far with...

will a ktm lc4 non digi speedo fit a 2003 650fe mine is'nt working the gears inside the clock have gone?found one in the uk need to no before i buy