kokusan

150 eur + shipping Located in Estonia

has been done by a few people I like this one http://husaberg.org/electrical/15015-kokusan-husaberg.html#p129331 more threads HRBmans pics are in the gallery so they don't show up http://husaberg.org/electrical/15345-cross-ref-ktm-berg-kokusan.html#p131904...

Was wondering if anyone ever used an aftermarket ignition coil for stronger spark on Kokusan ignition models. Dont have any problem with original though. It is a thought only for performance reasons. A friend put on his 2 stroke Honda a coil that have twice the out put of our original. I read...

Hi guys, ANOTHER NEW MEMBER, WITH A PROBLEM :oops: :oops: Ive been looking through a hell of a lot of post, to try and find the answer to my question, without having to ask, but with no luck, so apologies if this has already been discussed. I have a husaberg 650 2004 with kokusam stator and...

I am the proud owner of self destructed 2004 650 (valve into piston, bent rod, smashed cylinder liner etc etc.) but hey I got it cheap. I have just purchased a very low hour 2003 650 motor with all the eletrics and I have it running in the 2004 frame. I'd like to use the 2004 electrics as much...

Hi I was comparing some ref. from KTM and noticed something similar, can anyone tell me if this are the same: STATOR BERG - 800.39.004.000 KTM - 583.39.004.000 CDI BERG - 800.39.031.000 KTM - 583.39.031.000 Thanks for the help :cheers: ZAGA

Hi! my last modification :) https://picasaweb.google.com/1015717759 ... nHusaberg# spark is very nice :) Cover was made by me, ignition coil, flywheel, ignition module, pulse generator is from KTM 525, stator is from chinese scooter :))))))))) it cost less than 8 Euro :). It have 4mm biger...

ORIGINALE CDI FOR HUSABERG FS650 WITH CROSS MAP THIS is a original Husaberg CDI with a different MAPPING if compared to original CDI bundled with Husaberg FS650, this has different Advance CURVE more powerfull at low and full throttle. This CDI is compatible with model from 2005-2008. Part...

Are there any step by step instructions on fitting a kokusan ignition on an 02 fx470? I understand there are some pics on the gallery, but I can not find them? Thanks for the guidence :?: Also, I am in need of the wireing...

here's one for Mats.... for those that don't know it, the early and late flywheels can be swopped. so a pre 2004 can have a flywheel from a kokusan ignition bike fitted. everything sits fine. the problem is that the kokusan has a staple trigger on the outside of the flywheel and that is also...

There is lots on the SEM. Can`t find how to check the Kokusans timing. Cheers spanner.

Greetings all, This post has been a long time coming since my receiving of the Sparks rewound Kokusan stator. This started out to be a simple job, but, I ended up doing a bit of refreshing to other parts of the bike that delayed the posting of this thread. As many of the 2004 owners...

Hi guys, I am wondering if you could exhange the SEM system to a newer kokusan without to much of a modification? Would like som eaiser starting and improved functioning

My sem has given up, time to think about your conversion. Is it still ok? cookeye :wink:

Why does a Kokusan equipped Husaberg start? 300 cranking rpm = in excess of 20KV and .6MS burn time. Dale

Dynamic testing of a Kokusan ignition system using a small Lab Scope. Please visit my gallery for a full size image and additional new pictures. Dale

has anybody heard of kokusan ignition failure , i see a lot of sem units that fail or wear out . what is the life expectation of the kokusan unit ? the reason i ask is that i ride from home to the hills , i don't use a trailer . i cover about 100 klms in a loop . the fear of pushing...

Are the Kokusan ignitions used by KTM and Husaberg identical? Do they use the same Rotor? Stator? CDI? I am interested in weather parts can be interchanged, and if an after market (programable) KTM CDI will fit the Husaberg. Ben JBSracing

Thanks to support from BMG I will begin working on a Kokusan ignition upgrade this month. :) Dale

Gentlemen, Please review the following post and comment. http://www.husaberg.org/modules.php?nam ... opic&t=702 Thank you in advance. Sincerely, Dale