kits

Hi all, just acquired a 2007 FE450E and have drained the oil to fine lots of metallic filings. Thought I may as well rebuild the whole lot but can’t find a kit, anyone know where to find them? I’m in Australia Thanks for your help

I just purchased an 03 fe400 and I want to change all of the fluids and filters. Is there a place where I can order all of these? I keep coming up with 09-12 kits.

I've had a batch of these rings made and put them up for sale. known at the moment as a "44mm venturi ring" I have them for sale through the web shop and on ebay. as you can see, the ring is nearly square to give it strength in the corners. you basically have to completely strip...

hi all anyone knows how or where to get templates for fe 350 2013 Graphic Kits..

some of my work been making berg body panels for the last six years

I am about to test a rod kit in a FE501e from 2002. it's my bike so I am the guinea pig here aren't I! the rod will fit all Husaberg 501s from 2001-2005 generation. The rods run a little end bush and come complete with big end pin and bearing. cost will be 220GBP plus VAT which is 264GBP...

I'm trying to work out how many of these kits I should try and put together? I'm able to source the bearings and seals in one direction and the dowels in another. so if you have one of these bikes and you'd like a linkage bearing kit would you tell me? 'normal' prices I hope/expect...

jbsracinguk | eBay have fun!

Gday all, I have been looking for an aftermarket kit like the "Bolt" brand of replacement fastener kits. So far all of the kits have the torx head bolts. Not a major issue, but my 04 have any torx head bolts so I was trying to keep it original. Besides ordering OEM and paying a squillion...

anyone else have problems with swing arm and shock bearing kits? used all balls ones, came with wrong spacers I ended up breaking them jacking the swingarm into the chassis. (perhaps I should've stopped earlier). shock bearing seals were also ***** and fell out straight away. any recommendations?

What dual sport kits work best for the 09 450fe's?

Hello I've found 5 Husaberg rod kits for the FC/FE600s! they are OEM, come with little end bush fitted, a big and pin and bearing. they are 250 each which is what they were when Husaberg stopped making them. let me know if you want one! remember, no more are being made..... regards Taffy

Heard rumours of full spares kits for the 70 degree engine models. At a guess they have levers , filters and cables ?! Who does em and how Much ?!

Hey guys, does anyone have a part number for a swingarm bearing kit for a 2010 fe390? ive searched for individual part numbers on ebay etc, all i could find was the all balls bearing kit, are they any good? seem reasonably priced. thanks.

Just wondering if there are alternatives with clutch kits, for the older Bergs, other than oem?

is there any interest in new 600 rod kits being made? pin, bearing and rod, no little end required. cost will be 300gbp or 320 euros or $480. I'm only getting a dozen so I guess: "speak now or forever hold your peace"! I'll go ahead if I can get 6 orders. the FC501 rod was 4mm shorter...

Does anybody know what would be the best bolt assortment kit would be to buy for a 1997 FC 501. a little overwhelmed with all the options. Thanks.

Anyone know if ktm clutch kits from 520/525 ect are the same as 04/04/06 bergs? Springs? allloys plates? fibre plates?

I just bought a 2010 Fe 570. What other options do I have besides the ugly BajaDesigns dual sport kit. I would like something more like the stock appearance. Thanks

Gents i have a 2008 FE450, I'm looking at buying the trail tech x 2 husaberg 09/10 kit. are the OEM 09/10 lighting plugs the same as 2008 and is the watts the same??