kill

Hello i purchased 2010 =fx 450 but kill switch is gone can anyone tell me wiring for kill switch color of wires etc thank u

Hi guys . What tether kill switch do i need for my 2011 Husaberg FE 570S Should be normally closed or normally open ?

I'm having trouble starting my bike. I installed a new battery cleaned the carb and replace the spark plug. I have great spark so I decided to check out my electrical. Using a standard test light the orange kill switch wire is slightly illuminated while the key in on and fully lit up when the...

witch wires goes the red bottom to the harness?

I am sorting out the new to me 2009 Fe450 that I picked up a few weeks ago. This bike is titled for the street but the original owner never used it as a street bike so the street legal bits were never really sorted out. I have determined that the bike has the switch block from the 2010 model...

Hi everyone, Looking to install a hidden kill switch on my 08 Fe450. Is there any harm in splicing a toggle switch between the oem kill switch wire and grounding it... (kind of like a redundant kill switch that would be permanently grounded until the circuit is broken manually) OR...

The kill switch on my 390 is dead again. I replaced the unit last year while under warranty but now I need a better solution. I was thinking about wiring in an after market kill switch. My only problem is that I can't find a wiring diagram for the 390. Can anyone help me with what colour wire...

i recently purchased a 1992 350 the kill switch didn't work when i got it and after fiddling around with the wiring i have been unable to figure out how to get it to work i know the switch itself works but it is only plugged into one wire i tried grounding this wire out to the fork and the bike...

Not sure if anyone has posted this over here...I had posted this on another forum and received a good response. I think AUS models get a different switch but here in the states our multi switch comes with the kill and horn switch facing away from the rider. Placing it in a place that is hard to...

I just bought a KTM switch for my '09 FE570. The switch includes a blue horn button, high beam, lowbeam and red engine kill button. It plugs straight into the factory harness and works great except the kill swith doesn't work. I was hoping I could remove the stock engine kill switch and replace...

surprised that its not been mentioned already that HD have pulled the plug on Buell, shame about that as i did quite like the Buells. they were something a but different, a bit like husaberg. strange thing though is that they're sticking with MV Agusta. starnge really as you see hell of...

well as above my 02 501 tried to kill me or was i going to fast well about three weeks ago went for an awsome ride on some back forest trails was theer the week before and had a blast doing some huge hill climbs down 1000mt in 500mt distance 1st gear bancing all over any way back to the story...

I currently have no kill switch on the bike ive recently bought. Ive spoken to a few people with bike and theyve told me that the best way to stop it is to stall it?! Some one also suggested stopping it with the decompression lever on the clutch?! As in not over clued up i dont know whether...

So I finally bit the bullet and put a down payment on that 650 I was dreaming about. I figured I can control myself enough to not kill myself. However it won't be such a bad thing if it does kill me because the girl friend who I know is hoping for a ring is actually getting a bread maker and...

I have a choice to make. I need an enduro. Most of my riding will be on gravel roads, and salt water beaches, some trail riding. I have a brand new 06 FS650C, never rode it yet but getting to that soon enough. My off road experience is min. I got my first "real" dirtbike this spring, took it...

Anyone out there ever put an oscilloscope on the kill switch signal on the SEM ignition - ie the orange wire out of the CDI? I have a Trailtech computer I am fitting. They normally use a length of wire wrapped around the spark plug lead to capacitively couple a signal to drive the tachometer...

Had a 450 at home this weekend for a suspension tune. Done Friday with the usual success. Trouble was it wouldn't go at all on Saturday after running fine on Friday. Would tempt occasionally with some noise but.... After an hour or so of trouble shooting, first thinking it was flooded, then...

Hi chaps Witch way is it? 1999 manual shows kill switch off to the left and the 2000 manual shows the kill switch to the right?? This is going to confuse us even more!!!ha ha ha... Witch way is it??? :lol:

My bike took a spill off the trailer and the left side of the bars got some road rash. The kill button took a hit along with the decomp lever and clutch lever. I reconceted the wire running from the button, but now the button doesn't work. Where does it got and can I get a new button from any...

O.K. try not to laugh...I got my 'berg going tonight after extensive assembly and repair. I let the 'berg idle a few minutes and went to shut it off with the kill switch and she lit me up real good. I haven't checked yet, but I am assuming I either got a wire misconnected, or lost ground. I will...