Hi all, new member from Oregon, US, here. I’ve recently purchased a 2005 FE550 and it needs a new kick stand. The stand that was on it was a badly mangled ktm stand. It was in such rough shape I cannot tell if it ever actually fit well, like the factory stand. Unfortunately, I cannot seem to...
Hi Guys,
I have just bought my first Husaberg and its a 2002 FE650 but it is kick start only.
I have a base knowledge about Husabergs and lightly know my way around a bike.
It is kick start only and has no Battery, ECU, starter motor etc but I believe it has a rectifier.
I'm just...
I have a 2007 550 and I had to replace the clutch cover gasket. After doing so my kick starter will no longer move. The bike will still start and run fine with the electric start but the kick starter will not move at all. Can anyone let me know what is going on here and how to fix this? Like i...
Hi all. So I've just put my FS550 back together after installing some Kibblewhite dual valve springs and my kick starter is stuck! I'm a bit baffled by this as I didn't touch it or remove the clutch. Had to remove the whole left side cover to fit my new cam chain but I didn't think this should...
My kick start is jaming against engine cover because something is missing.
Anyone knows the part reference( i can´t find it on the repair/parts manual) or the shape/material so i can do one
thanks
Can anyone offer some advice on why I get the rear end kicking up when I go over most jumps rode a motor x track at weekend and felt like I was ridding a wild bull getting nearly buck off at old stage. I have to let off the power early and ride over the jumps to stop the kick back when I leave a...
Since the bike is a beast to kickstart I'd like to get some tips here. My bike is a 600 with kickstart only and the kick starter actuated decomp mechanism. I have kick started it a couple of times but I've yet to find a solid procedure.
Most places I've read states:
"Work the kick start...
Help!! :(
I have a 650FS 2008.
I have removed the gearbox cover on the left side of the engine to replace the sealing on the water pump.
Then i hear a sound from the kick starter while removing the case..
Now that I'm going to reassemble, the kick start will not move.
It is...
Hi all,
I'm back with the berg after a few year away and getting stuck in.
I've got a 2002 fs650 supermoto. I've had a few. I've never had one start on the "restarter" and always kicked it,
The bike I've got has no lights and electrics are minimal.
I'm starting to wonder if it's worth...
I just bought an unloved 08 650. When trying to start it, the kick lever does not return. Result, you cannot get a proper full "throw".
What do I need to buy? ☺
Sent from my iPhone using Tapatalk
Hi guys,new to the forum and recently got on a 2004 fe450.recently replaced the clutch cover gasket as it was leaking oil and after the greif of getting the kick start shaft and mechanism to stay put i finally got the cover on and all sealed up.kick start works fine and have taken it gor a day...
Hey, i ride a husaberg fe650 2003 taffmeister upgrade. I have a problem. When i ride a little bit the o-ring att the kick axle slides out and it becomes a oil leackage. Is this normal? Are maybe the o-ring to small or the kick axle has slide a little bit out? From the kickpedal to the o-ring...
I need a kick start lever for a 04 fe450. I totally grudge being paying £100 for one and there seems to be no second hand ones for sale. As you can get cheap aftermarket or second hand kicks for what seems like every other bike apart from ours there must be others that will fit ours anyone any...
Hey does the side cover have to come off to replace these 2 seals? Which would entail water pump and kick starter mechanism being disassembled?
Cheers mike
Just picked up a Fe570 and noticed the kick stand wasn't just removed it had broken off.
Looks like the frame had a little shaft that stuck out a little from the frame and the kick stand should slide on there. That shaft is broken off.
Anyone know of a way to fix it?