information

I have a 00 husaberg, last year of the old 4 speed gearbox engine I want to know what the advantages and disadvantages of these motors are compared to the newer design another thing I have a problem with the 4th gear, sometimes it skips or the parts for the box are available somewhere?

About a Month ago, with the help of an engineer I found out what was making the liners crack on husabergs circa 2004-2008. it is a sharp lip inside the top of the cases. (see the photo below). The Motor Cyle most susceptible to this appears to be the 2004 FE/FC/FS450e. I don't think...

i recently purchased a 2003 FE 400 dirt bike and am in the process of getting it to run. i was hoping someone had some websites on OEM parts or aftermarket parts for my specific year? i havent been very successful in my searches. my immediate task to get it running is to clean or replace the...

Hi All new to the forum and also a new owner of a Husaberg. Looking for some advice on cam chain tensioner ,cold start there a slight "ticking" noise (believe to be cam chain). Iv done some googling and found this is a known issue. So I was just wondering what people experiences were...

In the upcoming months I am looking to buy an FS570. If you have one available, are planning to sell, or know where I can get one please list below. Anywhere in Europe is considered. I am willing to pay well for the right one! Thanks for any help given! Jester!

i know theres been a lot of questions asked already but there seems to be no real 1st hand write ups i can find..i have just bought an 012 390 for racing and having always raced 450's i am wanting to fit a full system to give the bike more torque and hopefully a bit more on top where it seems to...

A little more water pump seal information My 2010 570 started to loose a little coolant about 50cc after about 5months and 3700miles, just been adding coolant after every ride, I kept telling my self I didn’t have time to fix it, so today I installed the seals . Takes about an hour. Should...

just joined the husaberg website (will pick up my husa FE 550 this weekend!!!!!) is there any technical documentation or user manual in electronic version availble for the FE 550 model 2004-2006?? the downloads only have earlier models 8O

got my barrel back from langcourt and as usual the job was superb. i called the engineer for a report and he explained that husaberg run chrome rings in a nikasil bore which isn't usual. he said that apparently cast iron but i think he meant steel are the alternative. the reason i have a...

Does anyone know, or can anyone find out when the trigger coil has it's first rising edge w.r.t. the angular rotation of the stator? A.k.a. the trigger coil going into the CDI unit will trigger at some point in the rotation of the Crankshaft. I'd love to know when this occurs with respect to...

SEM ignition SEM's charging coil replacement Starting Problems 1995... SEM ignition stators SEM regulation problem Question about ignition coil General Ignition info More general info Rectifier/regulator problems Rectifer Charging Circuit (good reference for rectifier and regulator...

FE 450 e 2006 Husaberg, any site out there that has blue things¡¡¡ brake reservoir, clutch, bleeder valves, blue chain, sproket, where¡¡¡ Thanks

fc is supermoto i think but what is fe and fx. i have year 2000 501fe abd my engine broke u guts thunk i couls fit an 1999 fx600 engine in it if i change carbu.. and exhaust. im just an beginer with bikes and learning :)

My 2003 FS 650 E has been at the top KTM dealer in south africa 4 months now. It went in for a service and they test rode it and gave it the thumbs up. 3 days later I sent it to KTM's sales dept to sell. Two weeks later the sales man said it's smoking, so I booked it in to the workshop. The...

http://www.motorcycledaily.com/25novemb ... 50_550.htm Enjoy, Joe

http://web.tiscali.it/abosco/moto/carb/ ... lorto.html http://www.ducatimeccanica.com/dellorto ... lorto.html

I need to know what the stock WP forks are on my 1998 FX600. Fork Size: 48mm ?? 49mm ?? Spring Rate: 4.2 ?? I'm really not sure and I need to know in order to investigate purchasing some parts such as seals, boots, springs, etc.. Also, I am looking at purchasing an additional Berg...