ideas

Looking for recommendations for a small tank bag for holding tools that won't interfere with me being able to get forward on the bike for steep climbs. Looking at the Wolfman enduro bag...? Anyone have any pics of a small tank bag on their Husa that works good for dirt riding? *Don't...

Since allot of talk has gone on by myself and a few others about new users, old users, advise and ideas, what is the census and thoughts on the use of forums for all to give advise and share ideas? IMO: Forums are for all users and to have the ability to share advise based on their knowledge...

Hi all, I recently purchased a 99 FE501 and a 97 FC501 for CHEAP. I got the 97 running, so now I'm working on the 99. What I've done: -Thoroughly cleaned the carb, checked needle for wear, cleared all passages, etc.. -Checked valve clearances. -Good plug -HOT spark -PO installed a...

I have been chasing these demons for months, just about given up. My '09 FE450 runs great until maybe 30 minutes to a hour into the ride. Sometimes it takes longer. The bike will start hesitating then progressively get worse until it regularly stalls at all throttle positions until it is...

Guys, Just wanted to ask for some thoughts or directions on where I could get some rim decals printed up. I've got my wheels being re laced with some new black excel rims over the next week and before I head out to start destroying them I thought I would get some rim decals to protect...

hi all just thought i would post and see what people thought iv been toying with the idea of desighning a new sem safe stator well over the last few days iv put my thoughts down on paper and came up with a stator thats sem safe and a direct bolt on replacement iv came up with a desighn were as...

Here's the story guy's. 2010 Fe570, 700 kms/16 odd hrs from mem. Bike was running fine with no drama's. Had to pull the engine out to have a new crank fitted under warranty, thats another story!! Got the motor back, fitted it in and fired it up. Started straight away. Put the helmet on and went...

Right i bough this 650 last year fs-e , bought it from a bike shope that went bankrupt the guy own's 50% of the bike the bank the other i've been paying him for the bike and he hasn't being paying the bank. got a lawyer involved still waiting to get it sorted but i was thinking :evil: what...

Gday, I have recently bought a 04 FE450. It has a flogged out thread for the sump drain plug. The plug that is in is a tapered thread brass thingo,it seals, but does not have a magnet. Has anyone got a fix so that I can install a magnetic plug?? I am thinking that having a magnet is...

hi guys, thought that most aussie berg owners would stop here for a look, so l might be able to gauge some jetting settings, if u dont mind. lve recently purchased an 04 fe 550 and seem to think it doesnt go quite as well as it should. at present the settings are as follows: main jet - 185 pj...

Hi Guys, We need some help have a read and get back to us 8) 05 450 KTM Problem The symptoms..... If you Start bike it runs at idle. It operates at 1/4 Thorttle then when increasing to 1/2 or full throttle the enginge will die so we then release throttle back to 1/4 and engine...

im after a new head light something with a bit moor light production than standard.can you get a glass suround one so you can fit a better bulb? or is there some thing better out their.i dont want to spend hundreds some thing cheap that works will do.

I have an 05 650FE with 5000kms on it . Today while riding i noticed that all of a sudden when i am in fisrt gear with the clutch in the bike still wants to move? Can anyone tell me how i may be able to fix this problem. It also seems a little stiff when changeing down gears and...

As most of you know, I have been making some parts for our Husabergs, and I have a couple ideas on some other parts, but I have a problem. We have yet to come up with a good name for the company. I thought it would be fun to see what you guys can come up with. If you have any ideas I would like...

I was riding the Red River enduro last Sunday, and DNF'd due to a mechanical problem. What happened: Slow speed crash on a technical uphill, with bike going down on right side...not a bad crash overall but it did land after falling on the downhill side. Symptoms: Bike won't start...

Anyone up for some low budget silkscreened unofficial Husaberg t-shirts? I'm thinking something along the lines of a black shirts with a small Husaberg logo on the front. On the back a bike image (dirt or supermoto) superimposed on a background of trees/mountains or a city/office highrise...

i wonder if HUSABERG management access this site , maybe they do maybe they don't . anyway if we had a say in development [ dreaming ] , what would you like to see changed/ improved . i would like external preload adjusters on the forks . can we make the best even better ???

Hy guys! I really need your help now. My ´03 501 E-started pretty perfect hot and cold for the last two years. Since a couple of weeks, it got worse and worse on the E-Start (Kicking is always easy). Now, there´s no way to E-Start that thing at all. Nothing! I checked: Autodecomp...

would anybody be interested to list any modifications they have done which has improved the berg, small or large, i know a lot is mentioned in the forums. but i am curious to to know what the members of today are up to. there is a lot of experience out there in bergworld :idea...

Hi Folks, I need some ideas or advice what to do: As I mentioned in another post, my 1997 FE501E quit all of a sudden while riding in the woods. The diagnosis: the cam gear broke apart and punched a hole in the head towards the water pump. Besides this, there is some metal scraped off from...