hoses

Hi, I have a 2009 450 FE and the coolant hose coming out of the top of the LH radiator needs replacing, can anyone tell me of there is a less costly way other than buying the whole kit as the SAMCO ones I have seen are over £180 - are there KTM ones that will fit? Thanks....

Hello all, As the rebuild is almost done, I noticed as I was running the motor for a minute or so that I had melted the carb vent hoses, as shown below. Those hoses are just PVC or polyurethane (I can't recall which) to replace the old ones. I think the temp rating is only around 70C. I...

were can i find blue hose kits for my fe 350? is the quality top shelf?

so I took my 1990 fe 501 into a shop and the guy took off all the hoses for the carb and never put them back on... no I need to figure out where they all go. I know which port is the main intake for the fuel so that gets on hose out of the way now I need to know where the other hose that runs...

Hi. Does anyone know of the PC Racing carb vent system/box? I ordered it and it arrived in the mail, so I installed it and followed the instructions step by step and double checked. As the instructions stated, I connected the middle part of a 'T' piece to each of the 2 side vents of the carby...

My 2004 husaberg fe 450 is leaking oil, some of the rubber hoses are getting dry rotten...does anybody know a place i can buy hosing to replace these? thank you im a little confused to a place to buy them! Thanks for any help!

I will have these done in a few days, Blue or Black with clamps... They will make them the same as the KTM XC with no thermostat for better flow and cooling 5Ply Silicone with lined S/S clamps email me for info if needed [email protected]

I am looking for a set to borrow to make the mandrell from ( tool ) for mfg of 5 ply silicone hoses assy I can make as a one piece design and eliminate the thermostat and also in the stock config With no thermostat you will flow 30 % more coolant. I will include lined s/s clamps with these...

Hi All, I'm in the process of changing the Mahle fuel filter in the tank of my 2011 FE 390. I've got the hose clamps off, but the fuel hose won't come off the filter. Is there a trick to getting them off ? :cuss: Wiggy Australia

Hi all just seen that Samco sport are making blue rad hose sets for FE390/450 & FX450 2009/2010 models[attachment=0:26kb8ki5]samco hose logo.jpg[/attachment:26kb8ki5]

Just got a semi-disassembled 99 FE600 on the cheap. There aren't any hoses on the carb. I have the fuel hose and fuel pump hose connected but not sure where the others go. I'm pretty sure the small hose barb aiming down is a fuel overflow line but where do the two brass ones on top go? Thanks!

I have an 08 FE 450 that originally came with the thermostat. The guy I bought it from removed all of hoses and thermostat housing and replaced it with two hoses. What bike comes without the thermostat setup so I can order the correct hoses? It has to be a US bike, I talked to a Husaberg...

I just bought this 2002 FX650e and it runs/starts like crap (a common problem I gather from posts). I have the whole thing torn down to the frame and I am working on getting it patched/cleaned/fixed peice by piece. When I was cleaning out the carborator I realized that the two hoses I thought...

Anyone know if those trick looking blue high heat rad hoses are available for Bergs? Specifically an 06 fe450? If yes - who carries them? Pro Circuit carries them for all the Jap bikes but nothing for bikes of quality and distinction. thanks

I have an intermittent stall problem, and there is no significant reason for it. What I want to learn is the function of the bunch of hoses I mean do they just work one way out the carb or does any of them need to properly suck air. Some times mud collects at the tip of them and dries so they...