headgasket

Looking to replace the headgasket on my FE390 2012, but 2 different references are proposed by my HVA dealer: 78030036000 78930036010 Which one is the right reference ? Both can be installed ? Cheers, Chris

Hello! Upgraded my top end with new valve springs etc, now I’m trying to fit the new head gasket, but every time I try the gasket leaks water out the exhaust and in the engine case, can’t find any issues with the top or bottom, no cracks or anything, old and new gasket are the same too. Bike...

Gday guys, Where is a viable place to get some head gaskets made for the 570? Or is there someone selling these gaskets at a reasonable price? Cheers. Al.

I was looking for a website to order a headgasket from for my 04 fs 450 so my machanic could put it in. Does anybody have any links where you can order one from, or from somewhere else? thanks

Whats up Guys? I have a 2000 fe400e. I was getting coolant in the oil, and weeping from the block slightly when it was run, causing a emulsion to form and seep out. The previous owner rebuilt the head recently before I bought it, it had 4 hours on the head. Everything was fine til I let it run...

what a peice of crap! two things have drawn me to that conclusion. firstly, whilst i don't expect to use an old headgasket, i certainly don't expect a headgasket to rely on a band of blue crap around the outside that you can rub off with your hand!!! i have had cause on a job to use a...

trieing to get hold of a 2003 fe400 head gasket, been told its 95mm bore in the book but the one i took out was 93mm bore and fitted correctly? which is right? cheers

Is it possible to re-use to headgasket, or is it just cheap and stupid ? I have plenty of old gasket lying around. Karl

did someone say that husaberg do a thicker headgasket? or was it me!!!! only i now want one!