handlebar

Time to replace my stock handlebars. Any suggestions for my 2010 FE 390. I'm 6'0 ish...XL arms, XL waist... TMI?? Thanks guys. Still lovin my 70 deg. Berg! UC

Hello, I'd like to buy a set of stock handlebar uprights/risers and clamps for my 2010 FE450. Other years may work too. This is for a 28mm or 1-1/8" diameter bar. Looks like the photo below. Anyone have a set of takeoffs laying around? Thanks. . .

I've had a load of choke cables made to fit the dell orto carbed bikes. they fit instead of the manual decomp up on the left bar. they are a straight fit and are spot on with 1" risers fitted. priced at 25gbp each. when you know where the sweet spot is they start first time on...

Does anyone run one of these? I was just browsing for parts for my bike and managed to stumble across it, the vibration on my 650 is absolutely terrible on long rides and these could be just the ticket. Had never seen them mentioned on here though so has anybody used them?

Hi Guys. Was wondering if any of you ever tried the EASTON EXP HANDLEBARS. How are they compering to the Magura SX? Thanks Mati

whats the closest bend of pro taper models compared to the Magura? I have now pro taper contour factory Suzuki / KTM stock bend, and I'm looking something a bit wider and maybe higher. My stock Neken is all twisted so it's no use for me anymore. I'm 182cm

I don't know if this has been covered before, but I felt compelled to tell other husaberg owners. My bike is an fs570 , 6 months old and 620miles on the clock, after going for a spirited ride I ended up at a local bike meet, and while chatting to a fellow enthusiast I noticed that one of my...

Polaris and KTM have collectively recalled more than 2,000 motorcycles because of handlebar clamp issues. http://www.powersportsbusiness.com/outp ... id=2763109

My manual doesn't say - I'm guessing Magura? I have a nice new set of EE handguards that aren't fitting my '10 FE450, but they'll fit my KTM - part #50-5137S for Renthal and Neken fat bars.

I'm looking at getting either moose hanguards or ego handguars.I have stock bars on my 2005 fs650e, there renthal bars. what kind of bend are these bars, what mounting kit do I need to buy. the EGO's list acouple of different bends and bar size?

Handlebar Motorsports in Durango Colorado recently became a Husaberg dealer, we are pleased to join the forum since we are a new dealer, we believe that the feedback and tech talk will improve our ability to serve our customers better. We currently have FE390, FE570, FE450, FE570S, FX450 Models...

I am curious about the standard setting on the handlebar clamp on the US version of FE 570 -09, is it in the front or the rear position. The EU version is in the rear position. Cheers Jorgen

Sorry for the stupid questions but I couldn't find the data anywhere 1.the magura SX on the 08 (i think that's the stock) are 1" right? 2.what would you recommend buying in order to rise the bars? I don't fell very comfortable standing on the bike and I was suggested to raise the bars. I'm...

Was going to order a Scott's under bar mount for new scoot, but found out after reading that FX has narrower spacing on bolt pattern that is on top triple clamp. Can anyone confirm this? The guys at Scott's dampners still show that the FX's are 90 mm spacing, and I think they are narrower... any...

I'm trying order a special top handlebar clamp for an '09 FE 570, but I haven't recieved my bike yet. Does anyone know the bolt spacing in mm or know if there is an equivalent KTM clamp? Anyone want to measure the 2 spacings on there's? Thanks!

OK I'm buying parts for a bike not in my possession yet... I need hand guards so is the stock handle bar 7/8" (22.2mm) or 1-1/8" (28.6mm)? Thanks, Donald

for the 1st time in my life i moved the handlebars as far forward on the yolks as you can....i cant believe the difference it's totally changed my riding position making me stay forward more and making my ride far more comfortable i only wish i'd done it years ago!! anyone else find out...

I am looking for the part number for taller mounts (if they exist) Mine measure 37mm from centre of bar to the mounting surface. 47mm ones are shown in this link, http://www.dirtbikebook.com/acatalog/Ha ... isers.html I have seen the tacky spacers that are available I would prefer the one...

what effect will i have moving the bars forward on my yolks ive never tried it b4 and am just curious?

Any thoughts / experience regarding the ideal handlebar width. I am riding predominantly single track woods. The stock bar on my '05 Fe550 measures 32" not including the handguards. I'm toying with the idea of taking an inch off each side, however I do not want to adversely affect the high...