gauge

Cheap,waterproof,accurate and easy to install,hope it lasts under the Greek sun. Top Gauge Digital Motorcycle MotoBike Oil temp Gauge Meter RED LED Waterproof | eBay A local machine shop made for me a T adapter for about 20$ to connect the temp sensor on the 20mm coolant hose above the...

Ok guys, I've searched TON and have actually checked my valves before successfully but am having some problems this time around. The bike is a 1997 FE400! The Problem - I cannot loosen the valves enough to fit a .10mm feeler gauge in. They valves are just too tight. The Process - I have...

Gday All, I’m considering fitting a TrailTech Vapor Digital Gauge to my 05 FS650e. These USA gauges come with speedo, tacho and temp display/sensors so I thought It might be good to have. Have any of you ever come across or fitted them ?? If you want to check them out go to their web...

http://www.dirtbike.at/motor/oelthermos.html Anyone know if one of the KTM's listed have the same oil plug as a berg (2002)?

I have always taken for granted that the thread pitch was 0.8mm so when setting valve lash I have used the 1/8 turn method. Where did I get the 0.8mm from? When actually measured the pitch is closer to 0.75mm per turn, provided my gauge is O.K. That would translate to a 0.09 lash or so. To...

I am overhauling my electrical circuit as I realized many of the connectors are a bit dirty. Better be sure than sorry. The larger connectors: 2 red ones from the solenoid, a black one to the battery are a bit corroded. The red one to the starter is actually cut in part. I went to the auto...