This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fs650

  1. S

    FS650 high speed "waving" issue

    Hi guys! I have a 2004 650 FS, and struggle a bit with high speed handling. From 110kph the front becomes lights and tends to "swerve" left to right, making it a bit scary. It's not a proper wobble, it starts progressively. I tried sitting closer to the front etc, the only thing to calm it...
  2. Sandtorven

    My 2001 fs650 rebuild

    Hi. Im rebuilding my 2001 650 engine and therefor starting this thread in need for some expertise :D Reason for rebuild is because the mains and big end failed. The rest of the bearings are bad so I’m going to replace them all. I’ll replace the HC piston & 82 stroker crank with a 05-08mod 80...
  3. M

    Husaberg FS650 wider singarm and tyre?

    Hi Anyone has experience with putting wider swingarm 5,5" wheel and 180 rear tyre? It is possible to do , but the chain will not go very straight as the frame blocks it from going more out to the side. Can the chain be a bit "bent" or would that be catastrophic?. Only thinking this because...
  4. S

    2007 FS650 Tank Shrouds / Spoilers

    Hello, I’m currently building up a 07 FS650 and was wondering if anyone on here has or knows of someone willing to sell some blue tank shrouds/spoilers and dark blue fuel tank? Thank you.
  5. T

    Is this Dellorto PHM 40 missing anything? FS650

    I have bought myself a non running 2002 Husaberg FS650 I want to get running. Since it has been sitting for approx. 6 years I thought that I would clean the carb as one of the things. (It has a spark when kicking) I have taken the carb out of the bike and it is a Dellorto PHM 40 ZS...
  6. B

    Husaberg fs650 2002 wont get fuel. Plz help

    Hi ! This is my first time asking for help after no Lucky st my own I have restored a Husaberg fs650 2002-2003 mod. Have timmed the engien for second time without any Lucky. Valve been set right, and timmed by taffy recommeds. I get spark, but wont fire UP. I can not se any fuel on...
  7. A

    For Sale For sale 04 and 08 FS650e with a lot of goodies

    Hello Bergists. I have for sale my 04 FS650e, registered on my name.Everything new in the engine, i mean literally even the smallest o rings etc.Crank restored and rebalanced without the counterweight perfectly by mr. Joel Asbach. Aside the engine also new is: Silicone blue radiator hoses...
  8. H

    VIN number FS650 FE650S

    Hello! Im not sure if this is the correct folder. I did try to search the forum. I’m looking into bying a 04’ FS650S Force Edition with 5784km on the display. However, when i check the license number it is registered as a FE650. Does anybody have experience in this, or is it possible to...
  9. H

    VIN number FS650 FE650S

    Hello! Im not sure if this is the correct folder. I did try to search the forum. I’m looking into bying a 04’ FS650S Force Edition with 5784km on the display. However, when i check the license number it is registered as a FE650. Does anybody have experience in this, or is it...
  10. A

    FS650 timing cam position??

    Hi i opened today to check my timing position of cam but no sign on or something to be sure for timing corect any ideas Expert people :)
  11. A

    SEM stator for Fs650 any?

    Hi Husaberg people i have a problem with a husa FS650 2001-2003 model not strong spark on the plug and SEM stator not in good contition (like this i bye the bike)i'm trying to start up but nothing i have 2 SEM but not in working order any opinion???
  12. M

    AIR! Idea/experience to increase air flow to FS650?

    Hi! In the middle of putting my berg together, and as always when questions/challenges come to mind, i search the wisest for answers/ideas:) Due to some hp increase in my 650 engine, I feel myself in the need of giving it some more air - or lots of it...;) I have been thinking on...
  13. E

    Excessive amount of metallic flakes in oil. FS650 2004

    Hello! (There is a short/TL;DR version at the bottom of the post) At first I'd like to apologize for yet another post about flakes in the oil. I know there are quite a few of these threads and should this one be considered unnecessary I will remove it. :) To the case at hand: I...
  14. M

    Husaberg FS650 03 No Spark

    Hi all, this is my fist post here and i am looking for some help please. I have a FS650 03 and it has no spark. I have just fitted a brand new stator as the old one was only making 1.5k OHM and not the 3k. After fitting still no spark so tested new stator witch is just over 3k ohm so all good...
  15. S

    FS650 - Different rear shocks?

    Hi.. I'm looking to buy a FS650 again - had one years back, brilliant toy :p... Looking around a different bikes, model year 2004-8. I've noticed that the rear shock or at least the spring looks different. Most are yellow, but some have white springs on the rear shock. Is there more to...
  16. D

    Fs650 e sprag clutch

    So had a major failure on mine,problem being I’m told the engine is 2005,but it’s a 2004 bike,part numbers are different.....are these interchangeable?
  17. D

    Fs650 engine maintenance

    2004? (I think)Typically how many hours/Kms are these motors good for before a strip down. Currently only being used on short runs until I iron out all the issues. And what would be considered routing maintenance in terms of pats replacement,are valves expendable,what’s hours can a piston take...
  18. Feca126

    Fs650 2002 adnvance ignition curve

    Hi, please help me. I alredy buy an programmable cdi but if i want to start, it kicks back, but if the motor start, its good betven 1000 and 3000 rpm but upper rpms its loose hp. Somebody have a good setting with stator position, base advance, advance ignition curve?
  19. Feca126

    35kw or A2 restriction kit Fs650

    Hi! I searching for restriction kit fs650e 2003! Please help me!
  20. T

    how to rebuild/assembly a 2004 fs650 engine

    hi guys, i'm a new user. i'm buying my second FS650. i already have a 628cc and i'm buying a 644cc. the problem is that the ex-owner has disassembled the engine. i've never done before. but i would like to assemble the engine by my self. (i probably have all the tools) is there a...