freewheel

just to let you know I've made a major investment in getting these made. I should get them in about 4-6 weeks so say August. Price wise? well in the Uk they were about 58gbp plus our EU member VAT of 20%. They'll have to be 83.333 outside the EU and 100 in it. cheers Taffy

Hi a part that often breaks has just stopped being made. it is the "Freewheel Inner Gear" for the starter Sprague assembly 2002-2008. without it these buikes are going to stop their leccy starting VERY, VERY quickly. :eek: If you have any sprague inner gears you want to sell please get...

Hey again guys! I find myself in need of some advice from more experienced people here. A while back I noticed that my electric starter would slip now and then. It would pull the engine over a few turns then spin freely until I let go of the button and tried again, or tapped it a few...

2013 FE350 I'm replacing a flywheel which was bent from a rock puncturing my ignition cover. Any hints on removing the roller freewheel bearing pack that fits into the back of the flywheel. It's in there tight. It's super spendy on top of an already expensive repair. Thx!!

Can anyone help with a 1999 FE501E to say which way the Freewheel Clutch Mechanism goes? Can it be put in wrong as I had a mate fix a broken Gearwheel on the Counter Balancer/Crankshaft the one that is held in with the small grubb screw. It has never started well since and now that someone else...

used my starter on warm motor, back fired and then the starter would not disengage at all. Broke the motor all the way down, and the starter gear is completely locked to the counter balancer. I've tried locking the balancer into a vise and using a strap wrench to try to twist the gear...

i tried to start an '02 FE650 the other day: aaaa hhhaaaww! that well known sound that says that its the sprague bearing i thought so i pulled the cover off and tightened the spring that goes around the sprague. over 1" i took off. i also checked the starter freewheel and noted...

I have a problem with my '07 FE450e. I bought my bike secondhand last autumn and it had a problem with the freewheel. It didn't hold as I tried to start the engine (room temperature). I replaced it and the new one worked well less than 10 hours of practicing/racing. Any ideas what would solve...