follower

Having 170 hours on my CFB's I figured I'd better have a look at them. I'm just taking a break to share, I'll post pics later. Have got to get it back together for a dirty ride in the morning. Same part as I've done before: 59036061090 bearing complete circa $26 ea. Only had a little...

Hello dear I have noisy cam follower bearing on exhaust rocker arm, intake is fine. Bike is fe 501 2003. Just call dealer near me and he told be that they are not available any more. Do you know any replacement or other solution? Are rockers from 2004+ compatible ? Thans in advance

Well, my 2001 fe650 is now in the basement for winter maintenance and upgrades. I had a tough time getting the valves adjusted this summer And never did get it starting on the button. Ive found the cam follower bearings to be in bad shape. Could this have been my valve adjustment and electric...

Hey Does anyone know if I can just replace the cam follower bearing on my 2005 fe550. I hear there is ktm part but can't find any info. Thanks

Was checking my valves yesterday and noticed that my exhaust clearances have opened up from the last time, 0.19 from 0.14. This I thought was odd but did notice that roller on the exhaust rocker arm has a small wear line on it that the intake one does not have. I looked in the service manual...

Hi, Anyone knows the part# of cam follower pins or complete follower assembly (If I recall pins with diameter of 7.6mm not 8mm).KTM part# is also ok.

Hi Guys, just a quick question,are you able to purchase cam folower bearing kits for the 04 bergs or do you need to replace the whole rocker arm as one complete unit.I have used a bearing kit only on earlier model. See YA!

well like the owners doc says not if but when. lost one of the cam follower bearings on my 02 fe 400. it took one of the adjusting screws with it and also made a crack in the cam cover. the adjusting screw was laying in the head, but the bearing is gone into the engine. a couple of questions...

did we ever discover a cheaper route to these? folk in the UK are now paying £40 per bearing. i've tried to track these through the bearing stockists but it seems to be an automotive part. regards Taffy

Rocker-arm roller bearings and pins This is for all '01 and '02 machines with rockers: Part# Intake: 200 281-01 and exhaust: 200 283-01. An upgrade is VITAL or continual replacement every two years of average use (as a precation). The factory modification was to increase the pin size from 7.6mm...

All, I am working on my 95 FE600. After disassembling the top end, I noticed that my cam followers were missing some needles. Intake: 10 needles Exhaust: 14 needles I know there are two designs, one for the newer style, one older. Mine is the older. Question: Can anyone (dealer...

This is from my Berg which was purchased 14 months ago brand new. I have meticulously changed the oil and airfilter all the time as well as regular valve clearance checks performed by Dealer. No warnings and this is what has happened. I have done 3000kms on it so far. I am chasing up Husaberg...

Hello, I am running a 2002 650 SM. It has a 53 cam and the 2003 rockers. I am getting a bit fed up with replacing the rocker bearings (rockers assembly) and was wondering whether fitting the 08 cam would allow me to increase the interval ? Looking at Dale's graph...

I just took the valve cover w/rocker arms off my bike for an inspection, now I don't know what to do. In my 30+ years of riding/racing I've never had a 4T torn down this far. I have a 2002 fx470e want to know what I'm looking for an how to fix it. Visually everthing looks OK. The follower...