flow

Hi! In the middle of putting my berg together, and as always when questions/challenges come to mind, i search the wisest for answers/ideas:) Due to some hp increase in my 650 engine, I feel myself in the need of giving it some more air - or lots of it...;) I have been thinking on...

Can someone please identify what’s going on here? Is this correct? 1-? 2-leaving motor to thermostat 3-from lower rad to pump 4-thermostat min flow bypass? 5-from thermostat to rad Thanks!

2004 FE450 Has sat for six months I put gas in today and when I opened the fuel cock gas stated pouring on the ground Hose from the T to the carb had a hole Replaced the line turned on the fuel and there is no fuel flowing to the carb New hose is opaque just air in it If I squeeze the fuel...

Hi there, i was hoping to get a bit of help from you guys in relation to my Fe450 2009 model. I recently burnt our my clutch due to some pretty harsh abuse in muddy conditions. Long story short, replaced the clutch and oil and then 15 minutes after that on a new ride the bike seized. The bike...

Does anyone know if there is a high flow pump available for the 570? The plastic impeller is cooked on mine and I would like to replace it with an aluminum one like Slavens sells for the 2 strokes.

hi all does any one know the coolant flow direction does it flow into or out of the bottom of the radiator as i am fitting a inline coolant censor for a temp guage and it needs to be fitted on the return coolant hose from the engine. :cheers:

I have heard you can drill / slot / the flanges on the tank to improve air flow into air box, I heard it improves hp? but do you have to have a look at the FI Mapping? Dont really want to modify? bike unless its worthwhile........ Thanks

[/code] Anyone got an explanation of the oil flow on the 70 degree,when the bike downhills,oil ends up pooling in under the rocker cover,hence the top screen under the bandjo bolt and the feedline back downstairs?

I recently commissioned someone known for flowing and testing heads to have a look at mine. I sent in three heads. head 1 was a bog standard 35/30 head as fitted to all bikes 2004-2008 head 2 was a bog stock 37/30 head as fitted to all 470/501/550/650s from 2001-2004. head 3 was a ported...

Hi All, I've just bought myself an FS650, and also just joined your great site. I've seen furious flow filters, which are a stainless reusable filter for sale on Ebay and was wondering if anyone knew anything about them. Apart from the great alliteration of course. They seem very cheap for...

Possibly nothing more than new snake oil but maybe... http://performance-design.net/flo_commander_2000.htm

Stock Data: http://www.husaberg.org/modules/Gallery ... .sized.jpg Big valve Data: http://www.husaberg.org/modules/Gallery ... .sized.jpg Big Valve Picture: http://www.husaberg.org/modules/Gallery ... .sized.jpg Dale

just wondering what the best protection is across that radiator? not worried about the beauty of it-just protection and letting air get through! was told years ago that the exit was as important as the entry and that the entry should be smaller not larger than the CSA of the rad. :shock...

Hi guys , here in South Africa the climate is very hot and when doing technical riding my 04 FE450 boils over a lot. I have fitted and over flow bottle behind the right rear number board. The excess fluid is stored in the bottle and then sucked back into the radiator when the temp cools down...