fitting

Just wondering if anyone has fitted an akropovic muffler for an fe570 on an fe450 will it fit...? Thanks in advance, Guy Sent from my iPhone using Tapatalk

Okay, so my carb was leaking fuel , so I pulled the phillips screw & easily extracted the brass fitting w/way worn out o rings (3) . I stopped at the KTM shop locally, no go. I ordered the kit from fleybay & it got lost in the mail. I really want to ride this bike ! So beings its fuel im sure...

Don't really know if this is correct forum.. My -99 501 ran fine. Finally got around swapping Dellorto for Keihin FCR 41. Bike now won't start. Keeps fludding the plug. Spark seems good. I tested SEM and got 2.90 Red/Black 16 Green/Black Checked valve clearances 3 times. All good...

I've bought a set of SM wheels from I believe a mid to late 90's KTM. The rear fits perfectly into my FE450 but the front is proving more challenging. It will physically fit between the fork sliders fine so there's no issue with clearance but the bearings in the hub are 17mm internal diameter...

Anyone know a link to fitting instructions for 02-08 Force Parts slipper clutch? Mine's off and almost ready to refit - just want to make sure I get it right! Cheers.

~Hi all got the lever and cable is there anything else needed to fit this any info would be great.

Hello everyone. Last night I have dissemble the Subframe off in order to clean the airbox. After the airbox was shiny I have put it all back together (35Nm on the subframe scrows). Now, the "ears" with the holes on the subframe can align with the holes on the silencer - it's like that the...

Hello all, I currently have a 45T sprocket on the rear of the '05 FE. I went to put a 48T (or was it 50T) on the rear, but it didn't look like it would fit at all with the chain guide. The chain guide also appears to be adjusted to its "largest" setting. What is the largest rear than can fit...

So I've had trouble starting my 02 fs650 berg since I got it a few months ago. The kick start has basically snapped so electric start only at the minute. How ever it's got the r6 starter on it,it manages to turn the engine over once nd then just spins. Rang dave Clarke and they basically said...

Hi guys, Can anybody tell me if the stator from 2002 FE450 would fit my 2004 FE550? Thanks:)

hi fellas. bike : 2014 Husaberg FE450 (anniversary edition). current setup : off road wheels. project : want to fit a set of KTM Motard wheels . Wheels obtained. Problem : the 5 inch rear , when mated with a 160 sized rear tire , contacts the chain. Is there some kind of technique...

Anyone fitted the heated grips from enduro engineering ? I have a 2011 FE 450. Already fitted a electric fan so i cant use that spare plug.

hi,i have recently purchased a 2003 650 sm husaberg, but it came with kickstart only,i have some kind of wiring with it for a battery, but does anyone know where the battery is located and what you need (i.e bracket) to fit it?.thanks :cheers: .

Hello, I fitted a new camchain yesterday by myself and thought I would share. My 2005 FE650 had only 2 clicks left at 105hrs. Thanks to Taffy for the IWIS 70 link camchain. So I used the ziptie method of finding TDC as I always have by putting it down the spark plug hole. Bike in 6th gear and...

Is that possible? If yes which model year? Please advice

When I bought my bike the previous owner had it re-sprung for a 110 kg rider. I was speaking to a guy who is fast, he won the experts in the cross country I went in yesterday on a 250 2t Berg, he advised that if it mine hadn't been re-valved when the heavier springs were fitted then both the...

G'day, I picked up a 04 FS650e a few days ago and I immediately stripped it down to give it a once over and also fit a few parts. One of the things I am doing is fitting a 08-12 KTM headlight and a generic LED tailight and I have a couple of wiring questions. I know I am not the first to do...

So it was late Saturday night, just finished the LHRB install, thought I would put the bike back togethor, get it ready for a Sunday morning ride. I usually have a rule about not working after 10:00PM because brain starts shutting down, but figured I only had about 30 minutes left to finish the...

My 1st topic :!: Bought this pipe off our local forum last week: http://www.wilddog.za.net/forum/index.php?topic=95707.0 Googling the exhaust, it was evident that unlike a normal slip-on, the header pipe slides into the silencer, as opposed to the slip-on, slipping onto the header pipes...

Hi looking for some help with front wheel spacing. When using the axle reduction (20-26mm) kit do I need the original wheel spacers? The kit comes with one spacer and I have ordered one original spacer as the wheels I bought hade none. So is the spacer that comes with the kit to replace the...