fitment

Getting my '98 FE501 Going, 2000 Fuel Tank Fitment? Does anyone know if a 2000 model tank will more or less fit a 1998 model? Thanks

Hello I am looking at the Akrapovic silencer 78105981100 do you know if this will fit a 2011 Husaberg FE570, if it doesn't fit could anyone suggest Akrapovic silencer that will work.

hi i was just curious, does anyone know if the later model front sprocket fits the 07-08 and older bikes ? hard to find a front sprocket for them or a 2t husky? cheers

Hi Guys, I'e spent the days looking at gallery pics and reading backwards regarding fitment of a cooling fan to my 04' 550. I'm running the 06 up tank so there's a ton of room on the rhs to locate it. I've been trying to understand just how the standard kit of say the 06 mounts...

Anybody running a 5AH turntech battery? If so how did you go fitting it into the battery box? Just got one and it is a real tight fit and will not fit right down in the box. I'm thinking I will have to trim the sides of the box off to get it to fit, but thinking this will weaken the battery box...

Does anyone Know If a 03 ktm 525 exc rea sprocet is the same for a 2010 450 fe? Im going to be parting out the EXC so I want to keep whats useful to me :cheers:

I have a set of Bark Busters EGO hand guards on my '05 'berg. The left one seems to be interfering quite badly with the clutch lever. I'm not sure if the aluminium bracket is bent or if I have the wrong mounting kit. Is there anyone here with an 04, 05, 06 that has the same handguards...

ok a few months ago i had a problem when an engine i had buildt went wrong, i have mentioned it before and those of you that know me know that i'm relentless in my search to try and cure the factory's mistakes. essentially, this '02 650 crank twisted just tootling along running it in...

quick guys auction ends in like an hour anyone know if the 99 FE can will fit 98 FC both 501's

I have had the engine and swingarm out of my frame which has just been powder coated. I am struggling to get the swingarm in, with the engine loosely fitted on the front plates. Any advice ? Lloyd

FE450 E 2004 1) Must the spring in the clutch slave cylinder piston be removed or not ? 2) In the diagram illustration of the parts there are 2 Bellville washers shown but in the parts list there is only reference made to one and later in the instructions they only mention 1...