fit

Hey just a quick one ,I've got a 2010 fx450, the rear wheel spokes are toast so I need to replace.im having issues finding listing for the berg but would 2010 ktm 450 sxf 19 inch spokes work. Cheers

Hi everyone! I'm Lorenzo from Italy. I own a Husaberg FE 350 2013, which KTM exhaust will fit? I'm interested in a full Akrapovic exhaust system for KTM EXC F 250/350 2013! Will It fit?

Wondering if I will be able to fit as my '02 frame is not compliance plated. alooking for options.

Hello, I would like you to write about what you can fit valves, seals and other parts to the Habsburgs I heard that the valves fit from ktm 520 and valve seals from the 1.8T engine from the VAG group, many users have a problem with it, so if you know something, write.

I have a 2009 Husaberg FE570 which has a bore of 100mm and stroke of 72mm. I have found that a KTM 500EXC has a bore of 95mm (same as Husaberg FE 450) and stroke of 72mm (same as FE570) with the same compression ratio of 11.8:1. My question is: will the KTM cylinder fit on the Husaberg so I can...

I am looking for clarification regarding what KTM exhausts will fit my FS 570. Is it true that complete systems that fit 2011-2012 KTM 450 SX-F will fit my bike? For instance will a Procircuit full Ti System for the 2011-2012 450 SX-F fit? Thanks

Hello, first post on the forum but I've been lurking here for awhile. Tons of valuable information, thanks to all the contributors. There is a set of Warp 9 wheels available locally that were originally fitted on a Husqvarna 701. 21 front and 18 rear (rear has a cush hub which is attractive...

Does a Ktm 690 cast front wheel fit a 650 SM or is the Hub too wide? I already have a 26mm axle so that should already be fine. The rear wheel is alredy fine.

Does anybody know will Hinson clutch from 2009 KTM 450SX to my 570 Berg? I have Rekluse on my bike and i want normal clutch back. If someone know, i would really be greatful for informations.

Hey guys, I was curious what the cross over years are on the older models. I am wanting to put a 1996 600cc engine on my 1995 FE501 chassis. Should I expect issues or is it pretty much a direct mount from one to the other ?

On my way to work this morning my bike started to make a nasty knocking noise and lost power. The noise sounds like a failing bearing but I’m not sure. Anyways the only shop near me that is willing to touch a berg told me it’ll cost over 2000$ for a rebuild. Anyone have a spare motor for sale...

im after a akrapovic but they are rare, surely the are exhausts from other bikes that will fit

Hi guys My engine is unrepairable and was wondered what engine other than husaberg will fit my frame husaberg fe 400cc 2001. Regards Lucas

Hi Everyone Is it possible to fit a later model starter ( 2008 ) into my 2001 fx 470e husaberg? Thank you in advance Ray

Hi folks, I just ordered a set of new tires for my 08'450. Front is the Dunlop D606 , 90/9012-21 Rear is same 130/90-18 My question is, is this rear going to rub or am I ok ? The 650 runs a 130 & doubt the swingarm is different. So thing is, I want as much tire back there for dirt as...

So... I just picked up a 2010 FE390 street legal princess with 208 hours. She's got nothing on my non-streetable FE570. Will the FE570 motor (with 105 hours) fit into the FE390? If so, what's the minimum I could swap to make it work right? My 570 is a BEAST and this new 390 is just...

hello! I have some severe piting on the clutch outer basket and main gear/primary gear. I believe this is producing metal flakes in the oil screen. I have a husaberg fe 400 2000 will these fit? Husaberg 400FE 1996 400 FE 96 Clutch Basket | eBay according to the parts manual this...

I hear that the fmf pipe from the 505xcf fits the 570 fe husaberg 2009, just wondering if anyone knows if this is true or not?

Second part of the equation. I have heard Distanzias are wide tires. Will this fit on a FE570? Thanks! -Paul

Hey guys. Just want to confirm before I pull the trigger on a supermoto setup. Your help appreciated! Cheers, -Paul