finding

Been checking with dealers, on Ebay, etc. with no luck. Only option seems to be Israel at 200 Euros. Would prefer to purchase in USA to allow for quicker delivery. Riding season is upon northern Nevada and no time to waste. I understand 2004-2008 FE450, FE550 and FE650 all use the same clutch...

Just want to check I'm doing it right... cheers folks. https://photos.app.goo.gl/R6GUtHbTreUmUq2l2

All, I'm relatively new to the forum, but I've been lurking in the background soaking up all the great info this community has to offer, so thanks! Picked up a 98 FE501E last fall that wasn't running and had coolant in the oil, the e-start was also not working. Wanted to make sure the bike...

Hi All, I'm wondering if any of you might know of a aftermarket Front Master Cylinder rebuild kit for a 1996 FE600? Any help is appreciated. Thanks!

Does anyone know of a manufacturer that makes an exhaust for a 2000 Fe 501 e? sure there is FMF and Akrapovic, but they only make exhausts for the newer models, which I don't believe will work on the older bikes. I don't need a full exhaust system, just a slip-on muffler would do the job...

I just thought I'd give me a plug! I can normally only get people to phone and say how good something is but for once someone put it in writing to me. He's a war hero from Afghanistan, pensioned off due to losing a couple of fingers, who is quite a character and fun to have around the...

Anyone with a good way to find TDC on my '13 FE350? Has a Rekluse, no kickstarter. In the past, I've used the kickstarter on other bike to cycle the engine until TDC was found. Rear wheel spins withthe Kluse :cheers:

i cant find a replacement kick stand for my 02 fs650, ive seen those bolt on ones but ive heard theyre a bit crap so i want to stick with the oem stuff really, anybody know where i can find one to fit?

Hello, I finally got tired of being too lazy to pull the side cover and check TDC correctly. So that's what I did. And took a quote from Taffy that he said. " Staple at 5 oclock then bring to 9 oclock with edge of staple in line with edge of cover screw hole" Ok, so I wanted to see how close I...

Hello there to you all! Im looking for a new set of plastics and decals that i can put on my 2011 FS570 and came across a few pictures that really caught my eye. They are black plastics with white text, but after several hours on screening google i cant seem to find out where to get them or...

Hi I have a 2005 fs 650e and I am constantly loosing oil. if I look in the frame it has traces oil oil in the frame. I have blocked off one of the breather holes and connected the other to the frame with a sponge filter. how do I stop the oil from leaking into the frame. I'm wondering what...

Second season owning this bike and am enjoying it a lot. I do have a question about finding neutral. It seems like finding neutral is tough to do. Has anyone else had this issue? No problems when engine is off just hard to find when stopped and running. I do have the rekluse z-start pro...

G'day All I'm wanting to find a new set of Plastics for my 05 Berg ( complete black set preferred ). The Plastics don't have to be genuine Berg plastics,If somewhere in Australia stocks these that wold be ace. If anyone can provide me with any info or web sites it would be greatly appreciated...

I thought I'd share a little mod I did to the ignition cover which makes it real simple to find TDC for checking valves. And with a Rekluse you can't turn the crank over with the rear wheel, and it's easy to damage the ignition cover gasket if you remove it to turn it directly. Most Japanese...

Parts guy said they thought Chevron was phasing out straight Delo 400 because all they are getting is Delo 400 LE. That is all Walmart has too. I haven't seen non "LE" anywhere around me (in TX). Is LE really not recommended or, if given the choice, get the other kind?

i have been reading all the posts on finding the true tdc on your engine but they dont exsplain the dead stop method can some one help.i think this is why mine is dificult to start. i have fitted new plug all new jetts in the carb and still it wont start. im getting a few kick backs.and today i...

ok after my run in with plod i just thought id ask if any body knows how i can find any local green lanes / byways to ride on: tryed on the web no luck it seems as if its a closely guarded secret. are there any sort of maps afficial body or groups i can contact.there is a track at 25...

all, I am looking for a good vibration dampning rubber mount triple clamps for my berg. I was thinking about the protaper rubber mount system with a new protaper bar but i dont know which one will fit- anyone have suggestions? the reason why i ask is i think i am suffering from a bit of carpel...

I was wondering if anybody would know where to find a Fe400e,or a Fe501e,or a Fe450e in california