fe650e

Where can I purchase a CDI/Coil for a 2001 FE650E? I am not getting any spark and I have a SEM stator that tests good (rewound by taffy, I believe) and it tests proper. The issue in having is when nothing is connected to the coil I have continuity between the orange and black (ground) wires...

Hello i own a 2006 husaberg fe650e and its the first bike i have ever owned. I have been trying to look for new plastics for it but seem to have know luck anyone know were I can get a set?

I am looking to ride in District 37 events and am being told that my bike must be able to pass an exhaust sound decibel test 96dB Max. Can anyone tell me how loud the stock exhaust system is and has anyone passed a sound check with a Big Gun muffler? Thanks! Evin 2002 FE650e

Riding in Florida's Richloam Wildlife Management Area on my 2002 Husaberg FE650e. Cannot go straight through the water because trucks with their 35" mud swampers leave ruts too deep to get through. My Revloc clutch really paid off on this ride - never stalled. Looking for others to join me!

I weigh 255 and need heavier springs on my FE650e. I called Slavens Racing and they only offer springs for 2004 up. Does anyone have any experience trying to use 2004 up springs on a 2002? The sales rep I spoke to gave me canned ID/OD answers but no specifics on if they can be made to work...

2001 Fe650E Nice shape and runs great-Starts with the button Taffy starter and carb mods New graphics/tires/water pump/battery Clean Washington title $2195

I’m new to this and wanted to say thanks for the add. I have owned my 2005 FE650E since it was new in early 05! Love it and have have nothing bad to say about it. The only thing I could complain about is having to replace my rear tires so often! Bike is super fast and revs like a two stroke...

Hi! I wounder If Anyone have fitted a 5,5" rim on a FE650 before? Can i get this rim to fit, If i change the bearings so they are correct size for my skinny wheelbolt? Rims are from a ktmSMC690 Thanks for any advice

Been putting it off for ages but deciding to get it out of the way. After a bit of info on gear. Main bearings: are skf ok or ntn better? Or is there better ones that will fit? Crank and rod: anything to look for? Is it worth throwing in a new rod while I got it apart? If so what's good to...

Well after 13 years I left my Husaberg with a local mechanic and told him to get it running again. It took him a year and now it is back on the road. I installed a Honda CB600 starter which made all the difference in the world. Now it starts with a quick push of the magic button. The engine...

Hi! My name is Martin, 23y old from Norway. I’m a happy owner of this 2001 model Husaberg 650 that i bought a while ago. The engine was "rebuildt" by Taff in january 2012, 2-3 owners ago, so it sure has been a solid build and done its job. When i bought the bike, it had not been used for a...

Hey guys! Looking for the stock jetting specs for my recently acquired FE650E. It came from a higher altitude and is very hard to start and won't idle. It could be the pilot is clogged and just needs a good cleaning--which I intend to do--but I would like to know if I have the correct factory...

Collectible quality with complete provenance. $5800 firm. Close to "new old stock" condition with minimal wear and use. Bought locally, new off showroom floor, when Husaberg announced they were not going to make them anymore. I have been its only rider (I'm 57 now). I used it to ride with my...

Basically, do we still have enough parts available to keep one of these bad boys together and functional? I know this is probably the absolute worst year for these bikes but I'm eyeballing one for possible purchase. Looks to be in pretty nice shape from the pics. Specifically, I need to know if...

So I probably needs that start sprague correct? Is that part still available in North America? What else should I look for when I take that side cover off. Sent from my iPhone using Tapatalk

Chasing front and rear hubs for an 07 fe650e, would prefer from some where Australia

Hi guys! I understand this forum is full of expertise so i hope i you can help me out! -A month ago i bought myself a 2001 Husaberg FE650e, FINALLY! The engine was sent to Taffmeisters for rebuild and tuning in 2012 - 2 owners ago. The engine is hard to start on the kick, because of the high...

Hi guys! First thing you do is to buy a Husaberg, the next thing you do is to find a Husaberg forum, i guess? I understand this forum is full of expertise and im happy to be a part of it! Im a 23yr old handyman from Bergen in beautiful and rainy Norway, im educated as a Engine Mechanic...

Anybody able to point me in the correct direction? A service manual would be a great addition to my toolbox.

Hello i own a 2006 husaberg fe650e and its the first bike i have ever owned. I have been trying to look for new plastics for it but seem to have know luck anyone know were I can get a set?