fault

Hi ! I have bought a cable to connect to bike for fault-code reading and such the E-bay ad said including software, but no.... anybody has a tip for working software for reading/cleaning faul-codes ? the cable is for USB to computer

My 09 FE450 has been a great bike. 500 hours now with no (zero) problems. However, something has now failed. When cranking, I see 1 (one) spark. Then nothing. I have a spark sensor attached( clear tube with a coil that glows red when a current passes through it). Showed constant sparking until...

Seeing as i have a spare tank laying in the shed, I thought i would have a go at taking out the fuel pump to see what all the fuss is about, i.e. inline filters and wires falling off. The only thing i did find that i thought was very bad, Was the tube from the pump to the inline filter had a...

Hi, I'm getting Flash Code 06 on my Husaberg 570 2009 fault coming up; My Manual says: Possible cause: Action: Not to helpful any ideas please? -Glenn

Having problems with my new berg, as follows: Will start from cold no problem, once engine is run hot it struggles to restart the only way to get it to restart is to turn engine idle screw two clicks anti clockwise. Did first xc race on berg at weekend and when it runs very hot (very muddy...

Hi, Having removed the engine from the frame. I've started the disasembly to rectify the fault that existed when I purchased the bike. (The bike locked up when the previous owner tried to start it after an oil change) What an amazing engine......The cylinder reminds me of the TZ250...