failing

I have a 2008 husaberg 550fe. i've gone through two voltage regulators in the last 6 months. i can still start the bike using a wrench--by touching the positive and negative screws/wires at the same time. i can also kick start it and it will start flawlessly. i live directly in front of the...

My fan stop working on my 10 fe570 and found the temp switch was bad. I replaced it with a replacement BMW one and it failed after two rides. Is this just a coincidence?

Hey everyone I stumbled on this beauty of a site while trying to find some service info on my Berg. I have an 08 550fe that decided not to start the other day during a ride and i had to bump start it. I tested the battery while the bike was running and it produced 12.31 volts at idle and when...

Hi all, my 650 has had a niggling problem for a while which I have just put up with. When your going hard on the throttle through the gears it runs great but when it's running around town slowly it tends to cut out momentarily, open the throttle and it coughs, clears and runs fine again. Also...

I'm not 100% sure what happened, but from one moment to the other the starter doesn't work anymore. It sounds like starter is spinning but doesn't crank the engine at all. I had a look at well known problems in the owners doc but this one seems different? Or is it a failing starter sprague...

I guess my radiator cap did not do what it was supposed to do, because at one point during my last ride, the coolant got so hot (I was trying Motul Motocool for the first time and I will keep experimenting with it) that it blew out, but instead of going through the overflow hose, it blew through...

please help. recently as documented on another post i lost a tappet nut. luckily this was recovered and had done no damage at all. did have to replace the inlet rocker arm as one of the screw threads was crap. nothing else was touched. bike will now not start and is at the dealers...