fail

Hi I have a problem with My husaberg fe450 2010. When they motor is hot it have problems to start . O clean inyector change filters they pump run and give 3,5bar of pressure, check de wire...... Some idea? Thanks sorry for my Bad English

Hi there. I have a 2014 FE250. The crankshaft position sensor has failed catastrophically twice now. Once at 200 miles, and again at 400 miles. When it fails, I mean really fails... copper wires broken and spilling out of the sensor. Has anyone else experienced this type of failure...

I just replaced the timing chain on my Husaberg FS 650 02. I also replaced both cam bearings, the auto decomp and spring to the modified/newer ones. I also changed the cam chain tensioner blade to the black one. Snapped the knob of the cam chain tensioner. The problem however, is that when i...

Hi guys! I wonder if someone can help me. My timing chain tensioner broke, pulled it out and saw that the moving part, the shaft which has those many teeth is okay, but the small trigger part ( which is supposed to stop it from moving) of it has its teeth broken off. I don't know if that small...

hey Guys, Need some help here, after ride on my FE390 on some tight trails the bike got to hot...lost some water,and cause i put a longer breather hose down i didnt see how much water i loose :( So after a while the FI starts to blink 1 long and 2 short ( temperature coolant sensor ) ,so i...

So I was out for a ride on a local trail, Sand mix grass and loam. when all was going fine. Untill I stalled (or so I thought?) on a sandy section. From hear the 450 just would not fire. Figured it was hot from the sand bagging.... So I Waited for it to cool, No fire,...... Waited etc etc...

Hi my fe450 2004 have main bearing fail on the right size used second hand 22000 km i don't now if have repair before regards