engines

On the internet I found several engines that look like husaberg / husqvarna 2000 engines, the manufacturers are JAWA, PRAGUE, VM, FOLAN, HIGHLAND ... Why so many similarities?

Hi everybody. My English isn't very well so i couldn' found any information here. And there is no information at Russian forums. I want to buy husaberg. it is 650 2005 year. But I have a problem. The bike was rebuilt from FX 650 into supermoto. And seller doesn't know what engine has the bike...

So the engine is splash/bath lubricated. Primary gear, clutch, idler and kick gear on the left side of the engine, in oil bath. Gearbox on the right side also in oil bath and oil can flow freely between right and left side. Cam, rockers, valves gets splash lubed by the oil carried by...

Hey all! Are you up for the challenge? I just came across Steve member here that has passed 800 engine hours without needing major rebuild. He has original bottom end and even chlutch!!!! He uses Dello 400 with some Lucas oil stabilizer. I am going to have 650 rebuilt and I will set it up and go...

090021H ENGINE HUSABERG FE 450-E 2008 $3,499.99 090023H ENGINE HUSABERG FE 550-E 2008 $3,499.99 090025H ENGINE HUSBERG FE 650-E 2008 $3,499.99 090025J ENGINE HUSABERG FE 390 2010 $5,256.27 090030I ENGINE HUSABERG FE 450 2009 $4,399.99 090035I ENGINE HUSABERG...

G'day, Are JBS 650 engines still avail? His website is 2010, 2011 or something? Is he still trading? Or does taffy have hot motors ready to go? Cheers Cam

Heard rumours of full spares kits for the 70 degree engine models. At a guess they have levers , filters and cables ?! Who does em and how Much ?!

Why is my 08 450 harsher at right up top rev's than the 650 engine. :cuss: now i have riden my mates 650 a bit but i never found the rev limiter on it but with mine i say the rev range is to limited and i will be revving it out at times only having it bogging down in the next gear on steepish...

I need two or three 570 engines for a custom application involving Formula SAE. It's for a 1/4 scale open wheel race car with a custom turbo-charged E85 injected project. Let me know!

This is what i got out off my 2 FC550 '02 Engines. The rocker shafts are totally different, en in 1 of the rockers there is a hole, witch the other one does not have? rockers, 1 from engine #1 (upper) and other one from engine #2 (lower) The other 2 rockers are identical :roll...

Do you think the mx450 thumpers will use a similar 70° cylinder angle engine as the new bergs? Would they benefit?

I've had my 2000 FC 600 engine semi torn-down for a while now. Looks like worn big-end bearings on the con-rod, plus a new camchain (and probably a few other bits 'n' bobs). I've been too busy riding the CR500 to fix the 'Berg, but now i've sold the Honda and need to fix it. What year engines...

I have a 2000 FC501 that I'm about to spend a ton of money on the top end and am wondering if it is better to buy a complete used engine but I'm only finding them from 1996 to 1998 right now. Is there any differences that I should be aware of?

I'm trying to decipher pages 26 and 27 of the 2005 owner's manual. At the bottom of page 26 there is a chart titled "RECOMMENDED INSPECTION OF THE HUSABERG - ENGINES USED FOR HOBBY-ENDURO COMPETITIONS BY YOUR HUSABERG WORKSHOP (ADDITIONAL ORDER FOR THE HUSABERG WORKSHOP)" At the top of...

To any member, How can I measure my engines RPM? Is there a multi meter or small hand held device I can use. Would like to be more exact when tuning. Appreciate any help. Thanks, Mackberg :wink:

does anyone know if it is possible to buy a new, complete engine and transmission from the factory?

Proud of of a new Husaberg fe550e 3 weeks ago.First time away from Yamaha in 15 years.My first ride out i liked the bike so much i talked one of my ride buddies to trade in his Ktm 525 in on one also. 8O My buddies 2 ride on his new 550e in the first week,came to an abrupt end when he...

As far as i can work it out these are the published differences between the 04 and the 05 engine. Now we just have to work out the difference between them with respect to the evolution of the part. 1. 800 30 058 060 Piston Cooling jet. This is a new addition to the 05 model. Don't have to be...