easy

Hi, I am looking at buying a 2012 FE390 but am told parts are getting scarce, especially plastics. Can you knowledgeable people confirm this? I am in NZ and the bike has done only 150 hours.

hello what to do on the dellorto 38 husaberg 400 FE carburetor to make it easier to start the bike. the scooter of the motorcycle doesn’t wear as much as the needle

2009 FE390 wouldn’t start on button nothing bike was dead. Turned out to be starter button connection behind headlight it was loose. Zip tied it all good now. Easy fix but the owners manual took me to possible expensive places starter/relay etc. good thing I have other 70* bikes just replace...

Hi guys! I understand this forum is full of expertise so i hope i you can help me out! -A month ago i bought myself a 2001 Husaberg FE650e, FINALLY! The engine was sent to Taffmeisters for rebuild and tuning in 2012 - 2 owners ago. The engine is hard to start on the kick, because of the high...

It contains only effective brain boosters and natural nootropics. Adderum Home - adderumreview https://twitter.com/adderumreview Site Title - Home http://adderumreview.simplesite.com/ https://www.flickr.com/photos/lordplanet/22701905910/in/dateposted/ Welcome to Ghost Now, there is no...

Hi, I have a 2012 FE390, I am very disappointed that the triple clamps twist so easy? I was riding on the weekend and it was very soft sand, and i stalled and fell/dropped the bike due to my midget legs. I Picked the bike up and managed to get onto the dirt road and the triple clamps were...

2001 fe470 always have trouble starting. am giving up racing this thing now. kick start does not start the bike, it did last week but it was a pain, i'm often too tired to get to the sart line. electric starter spins then stops. sounds like a dead battery. battery is new and fully charged. if i...

I have a 2010 FE390 theres 11hours on it and i got the ecu flashed. Its always had problem starting i would have to give it a little gas for it to turn over even that wont always get it started. My buddy has a 09 FE450 and that thing starts no problem you just press the starter. 1 second later...

Is it a complicated (or even possible) process to disassemble the cast aluminium component that hold the axle on the front forks (sorry I don't know their technical name?) I note they have a black plastic insert on the underside which corresponds with the end of the fork. Thanks Crispin

hi all, just wondering if there is an easier way to make jetting/needle changes without having to remove the carby every time. cheers

I have an fs 650 c 2005 and it has been starting easy, kick starting because the battery was bad, replaced it with another defective one. Anyway, do i need to check the valves if it continues to start easy even if I have30+ hours. thanks, edwin

Hi guys, I hope there´s someone who can help me cause I really dont know what to do anymore! My Fe501e ´03 worked pretty fine for about 3000kms. I changed Rocker-arm bearings, cam-bearings and the timing-chain. Battery is new and fully charged, Carb is clean and has new jets/needle...

All this info here is great. But from 04 till now 06,these bikes out of the crate should run excellent when delivered to the customer. No more is required in jetting a berg than the other brands before the customer takes her home. As a dealer i wanted to let people who are...