dvsk

Hi All, I know that Husabergs have a voice of their own with the whining, however I have just bought a 2002 FE650 and it is slightly tappy. I have adjusted the valve clearances and seems to be a bit better. My main question is, this bike has mixed mileage on the MOT which leaves me...

hi what is the best spring kit to get and where can i get it from for my fe 550

In the 05 parts manual it shows that titanium valves came on the 450 fc and fs-c. What are the advantages / disadvantages of ti valves. The ti valves come with dual valve springs. Why? Will the ti valve dual valve spring kit 800.36.028.044 work with the steel valves? Are the steel valves...

Hi All, This is my first post, I'm proudly the new owner of an 06' 650 with just over 140hrs on the meter. I have not ridden the bike further than around the block, and it runs awesome, but upon changing the oil, there was quite a substantial amount of aluminium (nonferrous) filings in the...

hello ! i am about to mount the dvsk kit on my 650 . but i am a bit confused on the picture,at the bottom its a spacer, but below that i have somting that look like a "spring retainer" that is located at the bottom of the "head". my question now ? should i remove that and mount the spacer and...

for those not aware of it I have some shims for anyone that bought a DVSK kit off me that you can have FOC! they are for those that had the second type of springs. all you'll have been supplied with are a basic spring set with a thin washer underneath. those with two THICK washers are ok...

anyone who has had a DVSK off me in the last year will have found that they have had to settle for a smaller 'installed height' than would have been preferred. I have had some really thin steel shims made at 0.1mm and will gladly send them FOC to anyone who has bought a set off me in that time...

Hey guys, Was wondering if instructions for installing a dvsk would be anywhere on the site or if there were any pictures or videos available anywhere that anyone knows about.

Hi all, and happy new year. It's been a while since I posted something, I'm rebuilding an old FE400 and was wondering if it's possible (and worth!) installing the dual valve spring kit, as I've had to replace two tulipped intake valves. Note I'm using the stock cam. Cheers Nikos

Hi, Does anybody know the installed valve spring lenght of KTM dual valve spring on KTM RFS engine?