dual

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    2011 fe 390 dual sport

    Hello, I’ve been creeping on this forum since last week, when i found a low km/low hour 2011 fe390. The previous two owners set it up as a street legal dual sport, and used it for trail riding. It only has 80hrs, 3200km on it! Looking forward to many miles of fun!
  2. Feca126

    Kibblewhite dual valve spring, 72 lbs seated pressure

    Installed new oem 37mm intake valves and kibblewhite black diamond exhaust valves with kibblewhite 96-96000 dual valve spring kit, seated pressure set to 72lbs with 42crmo4+qt spring base "cups"
  3. K

    Dual sporting an FE450e US

    I've just become a Husaberg owner by buying an 06 FE450e. It was too interesting to pass up! It had been stored outside, so I'm dealing with faded plastics and some rusty hardware, but otherwise it was okay. 2000 miles, 98 hours. Supposedly started life with the hill climb in Billings Montana...
  4. T

    Dual single track?? What the hell!?

    At the moment its my favourite riding. Track is from deforesting equipment and both sides usually are pretty even considering obstacles, much like parallel slalom. If the opponent gets in trouble you wait up, and go at it again, gentlemen racing it is :)
  5. M

    My 2014 FE 350 dual sport capable?

    I want to modify my FE 350 to be more of a dual sport/mini- ADV bike. Here in Montana we have unlimited fire roads and jeep trails but you have to do some pavement to get there. I do not want to have to throw the bike in the truck to get to the trails and fire roads. I want to make some changes...
  6. J

    In need of SR Racing dual exhaust pipe info, measurements

    I have been planning on making a stainless steel dual exhaust for my 650. Mostly for looks, but it would be nice to make it bring some power too. It would use two Akrapovic silencers. Since the SR Racing dual exhaust has been praised as one of the best aftermarket exhausts, it would be easiest...
  7. pollo

    Supermoto's and Dual Sports

    Ok , I changed the name of my Facebook group to Supermoto's and Dual Sports. I'm hoping to get a large Husaberg presence there so all you Berg brothers are invited. Hope you will return also Jon Andersson with all your friends. pollo
  8. M

    Set up for a long(ish) dual sport ride. 08 FE450

    Hello guys, so we're thinking of running a 5 day part of either the NMBDR or the AZBDR. to those unfamiliar with this names they are the New Mexico and Arizona Backcountry Discovery Routes (Backcountry Discovery Routes) This trips are 20% paved roads and the rest are graval and wide dirt...
  9. L

    For Sale WANTED: Husaberg FE 650 E

    Hi all, I am in the market for a Fe650e to dual sport in the WI MN IL area. I don't have much for experience with shipping bikes so I am trying to find something local unless there is some trustworthy member who is selling and can provide some insight. Thanks!
  10. CJ Benenati

    Dual Sporting a FE250

    Has anyone installed a dual sport kit to their FE250? Does the FE250 make a good dual sport ride?
  11. KenGray

    For Sale 2007 Husaberg FE650 Dual Sport

    2007 Husaberg FE 650. Excellent condition. I added the Bozarth complete dual sport kit (Dual Sport Accessories) and had it professionally installed by Motoxotica in Vacaville, CA. I also had Motoxotica adjust the valves, tune the carb, rebuild the starter sprag. Bike starts easily with...
  12. S

    Sprocket for Dual Sport Setup??

    Dale Lineweaver advises that a good street setup for my 05 fe 650 would be one where the bike will cruise at between 4000 and 5000rpm. If I understand Gearing Commander: Motorcycle Speed, RPM, Chain & Sprockets Calculator correctly, I could pair my 15t front with a 40t rear on a 140/80 18" rear...
  13. desertthumperx

    Anyone? - Dual Sport Trail Ride - Ridgecrest CA 2014

    If anyone would like to come join me and a few friends of mine, read the link below. We plan to do a Saturday race and the route has not been selected yet. We plan to set camp on that Friday. Let me know if you want to join for an enduro cruise with me (one berg rider) and three KTM riders in...
  14. H

    Brake light switch for dual sport conversion on a 97 fc501e

    Hey everyone Iam in the process of adding a dual sport kit onto my old 97 fc510e. My hold up is what to use for brake light switches ? What do you guys normally use ? Thank you
  15. S

    Dual sport kits for 09 450fe

    What dual sport kits work best for the 09 450fe's?
  16. B

    2001 501FE as a Dual Sport

    I have searched the site looking for the answer and I apologize if this has been covered. I'm trying to use this bike as camp off of Dual sport and was looking for an opinion of what I should be most concerned about? I have read the Owners Doc cover to cover, I have already done all upgrades...
  17. B

    MEFO, a Dual Sport tire that lasts!

    Finally, a tire that I don't have to buy again every 1000-1200 miles. My tire experience spans 36 years, and so many bikes I seriously can hardly count them all. On Dual Sport (DS) bikes, I've 60,000 miles under my wheels, and at a minimum 80% of those miles are on the dirt. I ride a lot of...
  18. B

    Dual Sport Tire that LASTS?

    I just mounted a MEFO rear tire on my FE570S. I'm tired of changing tires every 1200 miles and riding on an almost bald tire for that last 200 miles. After reviewing the available tires, I just mounted a MEFO Super Explorer onto the bike yesterday. From the looks, I think it will work fine...
  19. 0

    Dual sport tyres

    Hey guys. Had my 650 2 weeks now and have put 700kms on it. It's got some maxxis tyres on it (not sure on the model) and my god has the bitumen killed them (have gone from being near new to nearly dead). Now I brought this bike to ride to work on initially, but have been doing about 10X as...
  20. G

    Want to Dual sport my FX 450

    Is it possible to install a dual sport (street legal) kit on my 2010 FX 450? Is enough of the factory harness there to add some FE-570 bits to complete the job using oem stuff or would it be better to go kit form from someone like sicass or baja designs?
Back
Top