dimensions

Hi to all, Could someone share the dimensions of the water pump bearing, I am hoping to order the bearing prior to pulling the bike apart. Thank you Ray

Does anone know the specs about length, height, etc ? I want to squeeze my bike in a mini van (Fiat Scudo). preferably metric size length (in mm): height (in mm): width (in mm): or uk or us dimensions (i can use online tools to calculate metric size)

Hi all! I am looking for the dimension of these OEM FE570 parts: Piston: -diameter -height Piston rings: -diameters Conrod: -length (from small end centre to big end centre) -small end diameter -big end diameter -thickness at small end -thickness at big end I can use any...

Hello all! I am starting a new project (custom build) and would need a few measurements of husaberg 600cc engine. My plan is to use old (no oil pump and no electric starter) engine, but i don't have it jet, and i have to check if it will fit. Would someone be so kind and take few measurements...

Does anybody know the diameter of the Doma header, and if the stock pipe will fit? I've emailed Doma a couple times, but all their answers are in German, and point to a link to buy an exhaust. Bike's in storage right now, and don't have the time to run all the way out to the locker, so I call...

Hello:) My bike is a Husaberg FE 450 from 2004 My conrod was cracked and my engine is... a crap, looks like a cheese. But this is a different story:) I have to have new connection rod, but brand new costs 500$ or 402 Euros. I want to buy replacement conrod or maybe used, but i don't know...

Does anyone know the actual size / simensions of the 2009-2012 husaberg, height, width and lenght? thnx!

I'm keen to get this sorted so if anyone can help it would be appreciated. I need the dimensions of the inner and outer running surfaces for the old 1990's sprague bearing? so that'll be the OD of the gear inside and the ID of the outer gear? If I can have it in mm to .01 that would be...

I'm looking for drawing or dimensions on the rear sprocket for my bike... Anyone knows where to find? How big is the centrum hole?

Hi there, There is a christmas time, and I've got lots of spare time.I'm not satisfied wit sitting down fith familly and listening all these woman's *********.So I was thinking about machining a flywheel puller to mu Fe400 '03 on my latche.The stator is fitted to ignition cover. Anyone got a...

Hi all, The 03 650 is coming down soon to fix its failed crank. One bearing ( actually 2) bearings I cannot source as aftermarket (read cheaper) are the double counterbalancer bearings- because I have been unable to find any manufacturers(not Husabergs) part numbers for them. Accorording...

I need the external dimensions and weight for '05 FS650e as it comes in the box for the purpose of obtaining an accurate shipping quote. I'm assuming that the other models are probably pretty similar. Thanks. :)

I pick up my new 06 Fe450e tomorrow. My bar riser and handguard choice needs to work together. I want the fastway handguard system which mounts to it's own bar center top mount. This system works right on top a KTM standard bar mount system. I have seen it many times on KTMs. If the KTM...