diagnostic

2010 FE 570 Trying to get my TPS value sorted. The manual says to plug in the "breakout box" and check voltages at certain pins. The box they speak of is a dealer only tool that costs thousands. There must be a garage mechanic work around for this. The manual also mentions a diagnostic tool...

Looking for advise on an aftermarket diagnostic scan tool for my 2011 FE570. I have seen lots of adds on line, but don't want a piece of junk. Thoughts? Thank you,

Hi Please advise what kind of software you are using to read/clear fault codes from your bike. I need a software to communicate with a 2010 FE390. Android based software is preferred. Thank you for your support.

Gday Folks, Just bought a 650e, yet to start it, playing around at the mo. The previous owner told me that the battery was dead, and so I have a new one to replace it, any hints on how. One thing that seems to be is a bad earth or maybe positive conection, the taco will light up, but when...

I have gone through hell and back trying to get my '09 FE450 to run. Turns out it was a bad replacement fuel pump. I am posting this to as a quick 5 minute way of finding a bad pump, perhaps saving some poor soul the aggravation I went through. Simply remove the fuel line from the fitting at...