degree

Sharing my fuel pump parts woes in hopes someone else may have an easier time than I did. My initial failure was due to a bad Fuel Pressure regulator. (pressure test was only 5psi & immediately dumped the pressure so the diaphragm was blown dumping the fuel back to the tank) Since my bike is an...

I have a 70 degree fuel tank for sale with all the pieces. Just took it off my 09 fe570. Asking $500 US + shipping. Thanks!

In particular I'm looking for the T connector cooling hose that goes between the rads on my 2010FE390, part number - 81235026044 T-CONNECTOR INCL. ANGLE PIECE. Does anyone have any idea who still sells these in North America? Cheers.

I have serviced my berg several times and a while decided to shoot a vid of the whole process. This video is for the 2009 on FE 390, 450, 570 and the FX series bikes. Hope this helps newbies looking to try this for themselves. Cheers.

Anyone which KTM models I can use to swap out my clutch cover with? Will the 2007 to 2011 KTM 400 and 450/505 models fit?

I have a 2010 FE570 and im looking for the 70 degree subframe fuel tank. Thanks!

All prices include shipping unless your are outside the United States. International buyers pay actual shipping cost to their location. If you think the pricing is out of line make an offer. OEM frame guards SOLD OEM swing arm guards SOLD CV4 tank heat shields SOLD Jersey Large $120 SOLD...

Recently my friend got a 2009 fe450, hes been loving it and now I would like to get one. Looking for: (Years 2009+) Fe/Fx 390 Fe/Fx 450 Fe/Fs 570 Located in Houston, can make a trip to Austin, or Dallas. Would like to make the bike street legal, but if it's already that's good too. Iv'e been...

I'm looking for a 70 degree shock. Trying to put together a street tracker setup that I can swap on/off. It'll be getting rebuilt and shortened anyway so I'm no too worried about condition.

My bike came with a SC seat on it, I believe standard height. I'm thinking that I'd like a hole in my seat, and also that I'd like something a little better suited for hard use rather than touring. More height might be nice too. I see that a new OEM seat is available fairly cheap - $132...

Can anyone recommend a spanner tool to adjust the shock while installed on the bike?

There are already several threads about this, kudos to the authors! Just thought Id publish the photos from this session. To change the water seal (ie if coolant is coming out the weep hole) its a fairly small job, it can be done without removing the engine cover, just the housing needs...

Brand new in the box 70degree Auxllary tank for sale. Never used and never installed. I have just under $500 invested. Willing to part with if anyone is interested. Buyer will be responsible for shipping costs.

I have a bunch of part numbers for a 4 liter subframe fuel tank which don't seem to be any good and I read a couple of threads about some guys who tried to get them made. It seems like a perfect way to carry additional fuel and I wanted to know if anyone knows if there was an option and how...

Hey. Long story short. Two of four fuel pressure regulator plastic threads are stripped. Any ideas how to fix this? Maybe replacing the treads with nut type inserts like this one?

Hi guys, sold a Honda crf250 and got a 2011 fe390 today. One owner, awesome condition. Pumped to get out on a trail. Gonna need some kind of security like key or immobiliser so keen to see what you guys have done to solve that Cheers

Hi All new to the forum and also a new owner of a Husaberg. Looking for some advice on cam chain tensioner ,cold start there a slight "ticking" noise (believe to be cam chain). Iv done some googling and found this is a known issue. So I was just wondering what people experiences were...

issue solved

Howdy All, Looking into older threads, on the forum, this is a inherent problem with 70 deg bergs. But there is no definitive solution posted. So I thought I would tap into any thoughts. Oil leaking from where the shift shaft spline comes out. The shift shaft has a shaft seal ring (ktm...

Looking for one of the 70 degree racing tanks to put on my 2011 450 FE. Thanks for your time! Scott