decomp

Hey ! So i got my autodecomp for my 02 by mail today :) My question is how hard is it to install it and can it be done without taking out the engine ? Ive worked on engines before so not a total noob but dont want to start tearing it apart and do something stupid. and iam guessing the...

Hello Took the engine out of my FE650 for the first time (for me) and having a poke around. The link below is a video of the the auto decomp, should the spring be firmer than this? Also checked the cam chain tensioner and it was fully extended to the end "click". So a new cam chain I guess...

Wondering what the correct setting on the external rocker arm is supposed to be. There's some black wear on the nut underneath where it sits, suggesting that it was supposed to be touching / resting on it. At present, I've disconnected it (up at the lever end) until I figure this out. So at...

Hi all. Wasn't able to find anything on replacing the auto decomp procedure so I have a question about doing it with out breaking the timing chain in my 2003 400. I have an IWIS timing chain that's riveted, the chances of finding a split link around here are Nil and it seems in excellent...

Hi guys! First thing you do is to buy a Husaberg, the next thing you do is to find a Husaberg forum, i guess? I understand this forum is full of expertise and im happy to be a part of it! Im a 23yr old handyman from Bergen in beautiful and rainy Norway, im educated as a Engine Mechanic...

I'm planning to fit a fcr41 to my 02, 650. It came from a crf with the remote hot start. I was planning on putting the choke on the decomp lever. I've bought all the new parts to mod the head (dual spring, new cam, modded decomp etc) and was planning on removing the manual decomp system...

Hello, I'm from Germany and already a member for a while (2015) and reading your posts with interests. I bought a FE 501 model 2002 a while ago. Since I own the bike there's permanent trouble with it. I had it already in a former Husaberg workshop to get the engine fixed (ball bearings...

I currently have a 1995 FE 501. Can I use a 1997 FE 501 camshaft with the auto decompression in the 1995 head? If this is possible, should i disconnect the cable from the kickstarter and let the auto decompression on the cam do it's job? All input is appreciated!

Hi :) I just bought a fe 501 2002. It takes forever to start it, but it`s worth it every time :D The starter, of course, does not work. The kick starter is weird too. With most bikes, from my experience, you push it to the hard bit, use a bit of decompression, then kick it and you are good to...

Any of you guys have one laying around collecting dust you'd care to part with? Could use a kickstand as well. Thanks! Bruce

So I've had trouble starting my 02 fs650 berg since I got it a few months ago. The kick start has basically snapped so electric start only at the minute. How ever it's got the r6 starter on it,it manages to turn the engine over once nd then just spins. Rang dave Clarke and they basically said...

Just a message to owners of models up to 2008, Ive had 3 instances recently of the stopper on the camshaft sprocket which the counter weight for the auto decompressor rests on whilst the engine is running dislodging from the sprocket and dropping into the motor. One was on my own 2007 650 FE...

Hi guys ! I´ve had my Enduro-Berg for about a year and ran ~40 hurs on this little princess. Prior to me it had been overhauled with bearings and so. Previus owner said that thah was done just before 200 hours 200 was the meters reading for the milage and 74 was for the hours when I got...

I have a new manual decomp valve, pn# 200-059-01 with circlipe, oring and return spring and a used handlever with cable for sale $85 bucks for the lot, the decomp valve cost $123 bucks from the dealer I did`nt no at the time but the 98 600 had an automatic decomp valve on the cam I was going...

I'm working on getting a 2001 fe650 sorted out. Do I need to keep the manual decomp if I have installed the upgraded cam and auto decomp? I'm wondering about converting the lever to a choke. Or am I better off leaving the manual lever for kickstarting? Thanks in advance

Im installing a new decomp valve lifter to my husaberg. All the manual decomp systems were disabled by ex owner, and im going to activate the manual one working from lever in handlebar. I think im going to leave the kickstart one disabled. Im having problems to find out how to install the...

I've been doing some much needed maintenance on my 1999 600FE. It had an oil leak coming from the rocker cover so thought i'd go in for a look. Reading on here with starting issues the decomp mechanism on the cam can wear and not work. But when i pulled the cover off there is no leaver or cam to...

Hey guys, I have done several searches ... I know this is a popular topic and I'm most likely not the first one to bring it up but I can't find anything as of now so please don't burn me for asking :) I did try to do my homework :) Here's the bike: 1997 FE400 Enduro (no electric start)...

Hi, would any one be able to tell me the part number for the de comp cable that runs from the head to the kick starter. I have found this on e bay and it appears to be the right one for my 2002 650?? Regards upshegoes. http://cgi.ebay.co.uk/Genuine-Husaberg- ... 2a07ec0d1d

hi all i have a 99 501 where the decompression system is operated by the kick start mech, good idea i imagine but i cant get along with it. is there a mod or any way in fitting a handlebar decomp system off another bike that anybody has done instead of the kicker mech? also im after another...