damaged

My cam got damaged because the intake rocker arm bearing can someone help me with the part number of the KTM camshaft that will fit to my 2004 Husaberg? i may not need high torque.... even 10-15 kw less for my weight are ok, maybe a cam from KTM400 Can I change the damaged rocker small...

Hei guys. I changed my fuel pump and completely destroyed the quick connect, the in tank one with the four or five little tabs on. Have tried to find a part number, but van only find kits with either fuel pump or pressure regulator included. Do anyone know if this are possible to order, or if...

Righto, so finally have the bike together and running again after installing my Kibblewhite dual valve springs (Thanks for all the advice via PMs Bushy!) I thought I had this job done a couple of weeks back only to realise that the bloody kickstart mech had jammed! Sounds like this a common...

My rear shock wp pds is damaged and the reservoir has been rubbing . About 3 mm corner has been taken off ! Anyone else had this ? Anyone know where i can get one ??

Hi, found this one... :( one of the exhaust valves on my fe450 2008 does anyone know why this happens? what do i need to do when i install a new valve ? [attachment=1:1g78hvwd]IMG_3508 (kopia).jpg[/attachment:1g78hvwd] [attachment=0:1g78hvwd]IMG_3507 (kopia).jpg[/attachment:1g78hvwd]

Parts included: - Full gearbox - Cilinder head with undamaged cam and sprocket - Stock valve springs + acc - Bell crank + con rod (probably damaged) - Ignition + Cdi and wiring - ... Parts not included/damaged: - Side cover - Kick start (can put a 2002 kick on it if you really wanted it) -...

My 06 450 fe started to make a rather loud noise in the engine and I shut her down right away and went home. Found the water pump impeller had 2 vanes missing as well as the clip to hold it. After removing the impeller I started the engine and it still had the loud engine rattle. Checked the...