damage

Hello, So i picked up a fe570 with 380hours now. I changed the oil and the oil fiter bolts were begining to strip. I knew i was going to get it fixed but i wanted to squeeze one more ride in, i checked if anything was leaking and it was fine, but when i already felt confident that it was ok i...

HI Battery wouldn't charge so I did preliminary tests with multi meter which indicated stator was grounding to earth. I removed stator and found small metal debris pieces which had caused damaged to stator and to wire insulation. (photos attached) (Not sure whether to post in Electrical or...

Hi! Bike: 2007 FS650-e supermotard When the season ended here in Norway:cold: I decided to open the clutch cover to check if some parts needed to be replaced, as there had been some whining-noises while riding. There had also been a high-pitched noise while accelrating fast from a complete...

Hey all, In my recent valve check i pulled the fuel line apart and see this: I was very surprised! This is the upgraded 20 micron filter I had the dealer install prior to delivery and thankfully they gave me the 2 extras that the kit comes with. I'll be swapping a new one in when the...

Story so far... coolant hose split. While doing 70mph. Things got VERY hot. :hot: Fuel line melted. Lost fuel pressure. Engine stopped working. :eek: The result: see here. At a minimum, I'm almost certainly going to need a new head (and all associated parts, valves, guides, springs, etc) - it...

Hello Fellow Husaberg Owners, My name is Brett, I live in Southern California and am new to this site; I need your collective advice. I am on my second Husaberg, a 2006 FE 650 which has to be one of the trickest on the planet. The former owner and fellow Husaberg fanatic actually won the...

OK, 10 hours of street riding on the 05 fs 650c bike after a dealer in the northeast rebuilt my engine. I was riding on a highway 55mph and the bike shut off. No compression. After openning it up as per the dealer, I see the cam/cam gear bolts got loose and broke/ I checked the valves with...

I have recently had the misfortune of loosing a lot of coolant and not knowing it, then continuing to ride for another 20 minutes. The bike became sluggish and a bit lacking in power, it coughed and spluttered a bit then stalled when I pulled over to check it out. It would not restart until...

Hi Guys Hoping for a bit of confirmation from you really, recently i was sent some tappet screws of the wrong variety, (dont know how many read the thread). i did enquire about this and was told they would definitely fit my engine. The tappets screws were for a very early berg but i was sent...