cut

I am trying to understand how this valve works on the FCR MX 41 of my husaberg 650. I have noticed that a spring presses the pin diaphragm which in turn opens a bypass which adds air into the pilot circuit, making it lean. A duct carries the vacuum signal on the diaphragm which overcomes the...

I've got a husaberg 650 in complete bits and a ex wife on a vengeance Looms cut cut cut and scattered, relays gone all lights smashed, tacho melted So is it possible to DIY a basic loom from scratch, there are no local suppliers and no part on any local sites Help please

As I am totally new to the fuel injection malarky I am in need of some advice First time out on the 390, 40 mile road ride to get to the trails and some moderate speed stuff bike was running like a dream While doing some low speed stuff the bike just cut out as if it had run out of fuel A few...

Like many, if not most of us, my "black" fuel pump failed. It died after 65 hours or so. Replaced it with a CA Cycleworks pump and all was good. Was riding a couple weeks ago, and the bike lost power like it was running out of gas (it was not) then it came on again. The ride was on a hot...

http://i.imgur.com/wmNvR.jpg

Hi Guys, You were great help recently so, hopefully you will be again, Been running fine, nothing of concern. Background, in top gear just before slipway ( I drop down motorway 1 junction, about 2mile) gas it a bit and it bogged down, so backed off continued fine, began to gas a little...

Hi thinking of getting some of these for my 02 650 supermoto. I am talking about the road legal ones :D Was wondering if anyone has tried them on a berg and what they thought, I dont ride in the wet so theres no problem there. I notice that there 80 profile front would that work ok on the berg...

Lots of land, power saw, bush cutter and a strong back. Mostly rain forest with trees from 2 inches to 8 feet in diameter. I want to cut some single track for riding and hiking and was wondering if anybody has some experience in this regard. Most of the property is on glacial till so it's...

Im trying to find the source of a loud, high pitch whirring/squealing that seems to be coming from the clutch, its hard to describe but abit like a jet engine At best it is hardly noticeable (at tick-over) but at worst it is ear piercing. It seems to be worst at about 1/4 revs when coasting...