cracked

Looking for replacement

https://imgur.com/a/1nfo196 - picture of the sleeve. So I was taking the cylinder head off to renew my valve springs when I noticed that there was small nodge on top of the cylinder. Further investigation revealed that the whole top of the cylinder sleeve had been cracked clean off. In the...

So my clutch cover cracked, which is an easy fix. But I want to put a "case saver" on it so it doesn't crack again, I have looked and I can't find anything. Do you guys know where I can find something that fits or do I have to make it myself ?

Looking to shine any light on this issue, any one suffered similar? I imagine the issue could either be caused by bearing failure or crank spread? What's my chances of repairs?

I'm rebuilding my fe450 and found small crack inside inlet port on head. Machinist told me that is happening during molding process in factory and nothing to worry about. He showed me few car heads with same type of cracks.

Hello husaberg riders, Last time i went riding my husaberg was peeing oil all over the place. I found out that a piece of my engine block has snapped off. All this was caused by a bolt from the camchain slide that has got out of the threads and been making this hole in the engine case. Only...

Has anyone else encountered this problem? My akra muffler has cracked all the way around. This sucks since its titanium and I've never welded it before... :(

After last ride I noticed that I had cracked engine case. The previous owner already welded that place. And the weld broke. The question is why? And whether it makes sense to weld it again? Can be welded without opening the engine? Engine is 9mth after rebuild.

Hi all, Just recently i've noticed a crack in my rear rim around one of the spoke holes. The wheels are the factory Saxess Tubeless rims by KTM which i think are made by Behr. What are my options in replacing this rim? i'd like to keep using a tubeless style rim and re-lace using the...

Was just wondering if there is any maintenance I should be doing to the engine. I've put over 100hrs on it in around 6 months, mainly highway use as I was doing around 45kms a day using it to get to work. (mostly highway at 100km/hr and I have since moved so it won't be racking up the kms...

Hey Guys. I'm a little down right now. I am currently dissasembling my 2005 fs 650e and I noticed that there is a crack about 2" long just above the left side main bearing on the left side case. It's barely noticeable, It doesn't go all the way throught the case. should I worry about it, Am I...

Yesterday I dropped the bike at 0 mph and it happened to hit a branch and shatter my headlight. Is my only choice to spend 110 dollars on a headlight? Or can I get a replacement glass?

has anyone had trouble with this happening as it has just happened to my bike with 15 hrs on it,i believe there was a recall and it could be a warranty issue,if you have and 09 and not had the mod done take it to your dealer to get it sorted before it cracks on the top engine mount bolt.

I have had the large tank designed by Boss since he got them and really enjoyed the range it afforded. Tuesday I found a crack in the left rear bushing slot. looks like the plastic is thin. Any ones else had this problem? I made a trailside repair with some epoxy and fiberglass cloth that is...

Hi! My engine make loud noise. I open left side and primary gear nut open by fingers, there´s also crack on primary gear. I need your help what else I should do or check. And what cost new primary gear?

My 06 450 fe started to make a rather loud noise in the engine and I shut her down right away and went home. Found the water pump impeller had 2 vanes missing as well as the clip to hold it. After removing the impeller I started the engine and it still had the loud engine rattle. Checked the...

anyone else cracked a couple? I saw faktors pic both failures after a hard day in the whoops, both on sprocket side even though disc side is thinner on second hub. chain and spokes correct tesion, sprocket bolts tight axel nut corect tension. first hub cracked around 1000Km...

Hi I have a 04 FE550 with a round 170 hours on it and have noticed a crack in the frame near the rear brake lever , it's just under the footpeg i have 2 photo's. I can easily fix as I'm a boilermaker by trade but i though others may of had the same problem

Hello all - I've just got a '94 350 in need of a fair bit of TLC as a project. Although I've not posted here before, browsing the forum has already answered a lot of questions that I had. I've stripped it down and had the frame powder coated and fitted new head bearings. Whilst the frame was...

Hello, I have an early 2002 FE400e and I just finished splitting the cases for an engine inspection. After searching through many previous posts here, I knew to look for a crack near the swingarm pivot. Well, I found one. At the moment, it is very small hairline crack that is pretty hard to...