counterbalancer

Hey husabergers, How much side to side play is allowed in the counterbalancer? Theres side to side play in mine, but not up and down. Heres a video of it: http://bit.ly/2sKTssw What do you think? Thanks in advance. Best regards, Christian.

Hi all, Rode a 550 last summer and I still can't get it out of my head, so I'm doing my homework before purchasing one :) We've had a really good summary thread on the main bearings recently: viewtopic.php?f=5&t=18085 Some local riders have warned against counterbalancer bearing failure. How...

HI, I'm new to forum, desperately looking for counterbalancer shaft for fe501 estart, part number 21006605, hate to throw away bike for this one part, used is fine, damaged, whatever, I need something, please help!! contact meat 352 685 2374. thanks maicomann

removing counterbalancer have made a spacer to support the roller lip, the spacer obstructs the counterbalancers oil jet in crank web so leave it to spray oil onto the spacer and out similar as before or machine a slot in the spacer to allow oil to spray over to the drive main or...

what's the latest on this? friend of mine has gone to purchase the "double bearing" only to be told that even on the latest bikes they are single row and not to bother! just wondered what is fitted but mostly: what is done...? regards Taffy

Hi all, The 03 650 is coming down soon to fix its failed crank. One bearing ( actually 2) bearings I cannot source as aftermarket (read cheaper) are the double counterbalancer bearings- because I have been unable to find any manufacturers(not Husabergs) part numbers for them. Accorording...

Is there any way to determine if my -02 501 has a single or double bearing counterbalancer by means of engine serial#. Only for peace of mind. 140 hrs and all is well. Having read several dicussions on the subject of counterbalancer, I have understood that it is a point of failure and that it...

I just received the new double bearing CB for my '02 fx470. The CB comes with the bearings installed in the weight. The manual (as far as I can tell) suggests that one bearing be installed on the crank, then the weight, then the remaining bearing. What have you guys been doing to install the...

Since a rebuild my 01 fe650e has vibrated a lot so I've ripped into it to check the counterbalancer as I believe it may have been incorrectly assembled. I just pulled the transmission and rocker covers off and removed the camchain. The 01 model unfortunately is the only one that doesn't have...

Hi all, Apparently the previous owner removed the crank counterbalancer on my bike. There are two additional lightening holes near the crank pin, but how do I verify that it is balanced correctly? I have ridden it minimally prior to tearing into it, and it did seem to vibrate a lot. Is there...