correct

Correct way to install water pump seal Hi everyone, I recently purchased a husaberg fe400e 2002 model. there's a bit of a water leak coming from the wheep hole. The guy before me had done a lot of work to the bike and had actually put a new water pump seal and in, after reading quite a...

Wondering what the correct setting on the external rocker arm is supposed to be. There's some black wear on the nut underneath where it sits, suggesting that it was supposed to be touching / resting on it. At present, I've disconnected it (up at the lever end) until I figure this out. So at...

Hi, can anyone help me solve my problem? I have a FS650s 2005 (the Force Edition). I just found out that in my registration documents the VIN is VBKHVA4084M784190 and on the bike ingraved on the frame is VBKHUA4084M784190. Is it possible to have letter V on the fifth position of the VIN? Or is...

Hi all, I finally have all my new engine parts in front of me and as I was taking my new cylinder liner out of the packaging for the first time (I've had it for months now) I noticed that it is marked "3". Does this refer to the sizing? I only see reference to size 1 and 2 in the manual...

Hi all posted a couple of threads about this bike but striped carb of today and don't think it's the original carb I could be wrong it's a delorto vhsb38 with flat slide I'll post pic

Hi all, I just installed a Scotts damper on my 2012 FE390. I took a number of photos as I went just to make sure everything went back together the same way it came off, I'm an expert at forgetting how to put things back together. So after fighting with the forks and top triple clamp for about...

I have always charged the battery with a trickle charger: I attach the positive clip to the positive battery peg, and the negative clip to the negative wire bolt where it attaches on the starter motor. I recently put in a light weight lithium battery works well, but first ride I have developed...

I tried kicking the bike on a few different occasions but couldn't. now I know it works because a fellow rider helped me when we were out on a ride but he just played with every thing not really knowing what he was doing. Are there any Do and Don't as far and kick starting the bike? like not...

Hi guys, I have a BERG FS 650 E 2004. I live in Mexico City, 2200 mts over the sea level and I would like to know if anybody has a needle jet level tab reference depending sea level. I know right now I am over idel mixture (too much gas), I have readden in the owner manual it is in the 2nd of...

I have read on this forum and KTM talk that Husaberg underestimate the spring rates required to set up the bike correctly. If this is so, what rates should I be running for the fork and shock? 2012 TE 300 90 kg Rider, 102 kg in full gear I'm just a trail rider and don't want the full-on "race...

New Berg -is it correct to plug the purge can vacuum line when removing ? Already rerouted the the tank vent , connector plug , cylinder plug .

Can someone please tell me the correct torque for the counter shaft sprocket bolt on a 2011 FE570S ? It must be in the manual somewhere .. but I can't find it!?!?!?

I have a 2010 FE390 which is a dream, absolutely loving it, every aspect. it's my first ever 4 stroke after years on small bore 2 strokes. As a precaution; and the fact I had to replace the standard instrument panel after getting taken out and hitting a tree i have installed a Trailtech vapor...

Hello all, just after some advise. I've smashed my RHS radiator on a rock and had to replace it. I drained the coolant into a clean bucket and all was good untill the bucket was overturned and i lost the lot. I have some coolant in the form of "Castrol radi cool". It contains 33% Ethylene...

hows it, Im 200bls getting my suspension sorted on my fe570.. Question is.. if i get the correct spring for the shock to be in me sag parameters do i change the ones in my forks too? They seem quite plush n soak up everything i throw at them so i would of thought not?

Hi, i just got my bike back from berg dealer who'd put new chain on it. However when I'd got home and had a proper look I noticed the chain still vv slack and it seems to already be at full adjustment - ie fully back in swingarm beyond where the notch is just equal to the furthest back notch on...

Hallo! I was out riding noticing my frontsuspension worked much smoother than before... I was wondering why, 1, could it be that when I fitted the forks I didn´t mounted it so hard as I use to do... the screws at the lower tripleclamp... ? 2, Was it that I mounted the front...

Hi Bergers, As noted elsewhere, I hosted a suspension setup and tuning weekend with my mate and suspension genius Frank Pons at home this weekend. We did 8 bikes this weekend, including 3 Bergs, a 450, 550 and 650. Joe had had his 06 550 for a few months and not ridden it much, about 15...

My 2003 FS 650 E has been at the top KTM dealer in south africa 4 months now. It went in for a service and they test rode it and gave it the thumbs up. 3 days later I sent it to KTM's sales dept to sell. Two weeks later the sales man said it's smoking, so I booked it in to the workshop. The...

Looking to lower my bike about 1.5" I know after trying to set the sag that the spring is to stiff.What is the correct spring to order for my 2001 husaberg fx470e.I am 5"6" 165 lbs.The spring I have now is a PDS 7-265..