coolant

Using the video link above, it looks like there is a coolant leak at the water pump. If I am going to attempt this repair, besides part 53 & 54, what other parts should I buy? Additionally, what should I expect? Is there anything worth replacing while I have this piece taken off or something...

My bike is leaking coolant out of the weep hole and it's also getting to the oil. The problem seems to be the water shaft seal if im correct. I was wondering if i should buy the oem one or if there is a better one from another manufacturer. Ive understood that the oem one isnt the best one...

Loud noise appeared (on the left side?) after oil change and coolant drain (Took water pump cover off to drain). Bike had about 1.4Litres of grey cloudy oil in it and the coolant was also milky. The breather mod a previous owner installed was also gunked up with water and creamy poop that...

Hi all. I hope someone could shed some light on what to do best. I have a small amount of coolant seeping from the cylinder head. Question. Should I replace the head gasket or is there an easier fix. Like just tighten the head bolts? Thanks Brenden

my 2009 450FE has been smelling hot lately and making a wheezing sound. plenty of coolant in the radiator and it doesn't seem to be running poorly at all, but the smell and sound are concerning me. should i replace the water pump? something else? thanks!

Hi, I have a 2009 450 FE and the coolant hose coming out of the top of the LH radiator needs replacing, can anyone tell me of there is a less costly way other than buying the whole kit as the SAMCO ones I have seen are over £180 - are there KTM ones that will fit? Thanks....

I put the side casing back on my engine along with new gaskets and I rings but now the oil has gone cream Any ideas where it would be coming from please?

Hi pro, s! Found coolant leaking today when I had The bike running on idle. Only after a minute or so it was dripping from what I can see a bolt for transmission cover just in front/underneat The waterpump housing. Anybody know if it's a bad sealing/bushing that resigned? // The Husa rookie...

After filling the coolant up i realized that there was a small hole in the waterpump area leaking coolant and i don't know why, is there anyone who knows what this hole is then please tell me. It's a Husaberg Fe400 1998

Hi guys, recently completed the full rebuild on my 01 Fe650, went fine I thought, it's really had the full works, alot of time and money. Was very happy with the rebuild and had no concerns over the build and quality. However, after the first fire up, I noticed oik dribbling from the weep...

Morning boys and girls I'm looking for some advice... My fs650 appears to be loosing coolant somehow and it's got me a bit stumped ! I fill the rad completely full to the point of overflowing (it drops a little out the overflow ) and then go for a say a 10 minute gentle ride and then when...

As part of my rebuild, I'm redoing the hoses. As good a time as any to do an upgrade - so am evaluating a few options. One is is the Samco precut silicone hose kit. Spendy, and I can recreate it by hand buying silicone straight, 45 deg, and 90 deg silicone hose stock. I've seen folks...

I've got HUSABERG FE450 2008 and I don't know which coolant is best to use. I've checked owners manual but didn't find answer please help me ;] I found on ebay: MOTOREX COOLANT M5.0 or M3.0 and I don't know which buy thanks for help

Can someone please identify what’s going on here? Is this correct? 1-? 2-leaving motor to thermostat 3-from lower rad to pump 4-thermostat min flow bypass? 5-from thermostat to rad Thanks!

hi all, ive got the vapour computer fitted to my 2002 fs650. i noticed there are 3 wires hanging out. I've looked into them more and have ended up buying a power lead and the coolant sensor my question is where is the best place to locate the coolant sensor? it invloves cutting one of my...

I've read around a little bit and people are saying "just use the coolant for a dirt bike, don't take any risks". But in theory, coolant is coolant. Lowers freezing point, and raises the boiling point so is it fine to use a standard coolant that one would use in a car?

hi all! gonna drain coolant from my 04 fe 450 and change to waterless coolant system, i normally just take the water pump cover off but just wondering weather theres an easier way?? probably not:unsure

Last night switched from water to coolant (70/30). Ran it and no problem. Today road to wash and then downtown to work ~4 miles away. All was good. Had to shrink wrap and electrical tape the front small breather hose because pulled a "Tony too tight" which tore the hose. Happy no...

Hello all, finally decided to get registered on the forum here after reading and wandering around here for a while. I just got myself a husaberg fe 450 supermoto from 2005. It's and absolute beast, did my first testride today but after 10 mins of riding i noticed there was coolant leaking out...

hello! After rebuild the oil is a little bit grey after a couple of hours riding. Both head gasket and waterpump seals were replaced during rebuild. Is there anywhere else there could be a leak? The waterpump seal came in a little wrong, but it looks tight when mounted. and the o-rings on the...