connection

Hi, I have a Problem with my Fuel Tank, Gasoline Connection. My 1994 FE 501 lost Gasoline. The lowest connection on the tank which leads to the vacuum pump has become leaky. The bike has been sitting around for over 6 years.The connector has become totally brittle and unfortunately crumbled...

Hello for the first time! I had to dismantle mine 550 (2006) because of some steel shavings and aluminium slime on my oil plug. Everything worked "fine", it had only couple issues which were really clear when I dismantled engine. Now I have 'little' problem because if I would be very smart I...

Question: On a 2011 FE570 in California, if I remove my gas tank evap canister, do I need to worry about the power plug that connects to it? In other words, does the ECU recognize if the evap circulation pump is not connected? My thought is that the power connection simply supplies 12 volts...

I've bought some aftermarket LED Front and Rear Indicators as they we're big and ugly and the rear's were broken. The connectors for the current blinkers are the ones below But all the other blinkers all over the internet have the following connectors linked below as do the ones which...

I have an 09 450 with an akropovic slip on. Whenever I pick up the bike there is a noticeable clunk which, after inspection, is the slip on shifting at the mid pipe connection. This appears to have started recently as I have not noticed this before. The only change is I replaced the carbon...

Does anyone else have an issue with the seal or sizing between the header pipe fitting into the mid pipe section? The top of the 2 header pipes, seems quite a bit smaller than the midpipe I.D. Thus it leaks alot. I have tried removing the pipes, cleaning and using an exhaust cement, but...

I noticed a wire and connection hanging down by the rear mudgaurd, anyone idea wht this connects to>? :eek:

I have a 2" tear in my boot that connects the throttle body to the engine. Just thought I'd throw it out there and let everyone know that this piece will break down. My airbox boot also seems alot softer than a newer airbox that I installed for a friend... Lots of heat in this area. My symptoms...

I just had my forks and shock tuned by Factory Connection - new springs (for my weight) and re-valve. So amazing to enjoy that magic carpet ride! I simply could not find the limit, this suspension setup just soaked up everything in its stride. Highly recommend to anyone to get your...

Hi has anybody tried one of these or know anyone who has,or any thoughts on whether it works looks interesting though......colin : http://www.factoryconnection.com/Mercha ... ode=FCSHKP

I’m having problem with User Setting Tool. It cannot connect to the ECU. The software is connecting to the UST adapter, and the status of the software is “Waiting for Commandâ€Â

Any tips on installing the oil connection nipple (on the clutch side of the crank)? Do you use loctitie, other?