con

Hello friends, I can not find conrod for my motorcycle. How do I find a compatible brand, model. help me plz :Ağla::Ağla::Ağla:

we have ordered just 10 con rods for the 1990-1995 350 and the 1996-2000 400. they are due at the end of next month-May. we have taken two pre-orders so 8 left. when i get these in it will mean that all tthree early engines are covered again for the first time since the factory...

Installs in minutes https://youtu.be/r8lCGTltAm4

Hi there im new you here, last week a bought husaberg FE 501 with broken connection rod, im trying to find some alternatives because new parts is no longer avalible. Can you please help me where i can find con rod for my berg, or what kind of con rod i have to loking for. On photos are...

I thought it best to start a new thread on this topic :D The KTM 450 using the plain bearing, as Bushie posted, from what I can tell is running on a 35mm pin same dia pin as later/ 2003? up to 2008 Husabergs. The concept is nice in that the weight saving on the big end would be considerable...

I'm closing in on a final order for getting some OEM 600 rod kits made! If anyone is interested I'm asking to register their interest with a £10gbp deposit. http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... _626wt_698 the £10 deposit is really small but it stops the ********! I hope those that...

Hi, trying to find a cheaper than original conrod kit for my -08 FE450. Seems to only be original or mx composites around. I saw Taffmeister on ebay with the 1mm shorter conrod, but that does not feel right somehow. Here in sweden the original conrod kit is about 360EUR and mx composites kit...

Hi, Would anyone know the length between centres and width of the big end itself ( not the rollers ) For 05 onwards 650s? Also can the crank pin 35mm be brought separately, part# ? Cheers spanner

2 rides and 140 miles later here is my quick opinion on the new berg. I'll start with what I don't like. This is the noisiest motor I've ever set over, likely due to the 70 degree, closer to the ears. Frankly, it sounds like I'm stirring a bucket of bolts every time I hit the throttle...

hi every body, i will assembly my crank shaft this week with a new rod kit. according to 99 repair manual, the distance between the 2 halves(i am not sure if this is the right word) should be about 62mm. because the outer surface of the halves has a patern and isn't flat, i would like someone...

Hi i am after a bit of advice please, could anyone that knows about cranks please tell me how they clean out the small oil ways jet type thingys in the crank? do you drill out the jets and replace them or just poke and clean until happy? Sorry to ask but i am about to do this job and only...

Con rod lenght for different years? 650 2001? 650 2003? 650 2004? 628 2005?

hi guys, last week i heard a clicking noise coming out of the engine.. then i noticed that my left exhaust was unscrewed so what a relief i said and screwed it to make it stop :roll: it didnt stop so to prevent any further damage i split it to find out the problem. turns out that con rod...