code

Does anyone have the paint code for the 1999 silver frames?

In need of help locating this relay it seems to be a unicorn..! The bike suddenly stopped after just after starting 1-2min and the error code: Fuel pump relay Prior to determining i've changed fuel filters, spark plugs, and verified all fuses. The fuel pump will prime there is spark because...

Hi Im new to the forum and i just traded in my RMZ450 for a Husky Fe450. I modified the exhaust by removing the restrictor cone in the middle of the muffler and I also removed the double screen in the muffler end. Bike runs great but I’m getting 5 long blinks and 3 short blinks. I notice...

I've got a problem with the bike, I'm thinking that I need a throttle damper of some kind? about a month ago I put a new throttle tube and cables on for the first time in 10 years. I have one of those throttle cams for the softest delivery and then found a throttle tube for $10 that did the...

I keep getting error codes of 9 blinks. Could this be causing my bike issue of being really hard to start? 2011 FE570

My 2011 FE 570 has been giving me trouble ever since it took a fall on hard rock a couple weeks ago. I was able to ride it back to my trailer at the time, but since then it hasn't liked to start. I postponed working on it and now it isn't starting at all. It sounds like it's cranking just fine...

I have a 2011 FS 570 with only 22 hours and the flash code is blinking one long, 3 short: air intake temp sensor. I have never removed the gas tank. Any ideas? Help? The nearest Husaberg dealer is far far away..... Thanks!!!

for a few rides now I've had a flash reading on the clock of 'r6' or 'rb' ? jokes about failing beefy starter motors aside, i can't see a code for this. anyone know what it is? I'm getting a low battery lately so I need to invewstigate why but otherwise all is good. regards Taffy

I have the a 2010 570 FE, I just replaced the fuel pump, filter because of stalling and later would not start. Now that I have it all back together, I am getting a flash code number 6 ( six short flashes) I have check the position of the throttle sensor, the screw it tight that holds it in...

Can anyone tell me what bike/model and year the above forks are from or maybe what some of the coding tells me?

Hi, I'm getting Flash Code 06 on my Husaberg 570 2009 fault coming up; My Manual says: Possible cause: Action: Not to helpful any ideas please? -Glenn

Having problems with my new berg, as follows: Will start from cold no problem, once engine is run hot it struggles to restart the only way to get it to restart is to turn engine idle screw two clicks anti clockwise. Did first xc race on berg at weekend and when it runs very hot (very muddy...

It was a really warm day last ride and then after a quick rip I noticed the FI light, It is code 13, intake air sensor. I checked the plug and sensor all seems fine. Do I need to take it to the dealer to reset the ecu? or is there a way I can do it myself?

i've been looking for a part number for the OEM dual valve springs that are fitted to the FS-C450 and thee the FC450. does anyone have a part number from their parts book? has anyone seen these valves and noted any coloured stripes on them? the stripes are the coding for the valves...

I have rubbed a few quite deep scratches out of my husaberg '03 plastics. No the colors of the rubbed parts and the non rubbed parts are different. So i am gonna paint the plastic again so the color is the same everywere. But I need the color code (RAL code) of the 'husaberg' yellow for...

Before i open the engine for replacing the cam (thanks to Taffy), i need to know the bearing code of the cam bearings, can somebody tell me that ? Bike is 02 400FE -Mika