closed

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. T

    DeBeque Co. trail closed?

    Every April we have a group from MN ride around the Grand Junction area. Had a friend call from out there saying all the cool single track is posted closed! Anyone have any info on this? DeBeque is one of my favorite places to ride....
  2. T

    Oil capacity te 300 wp closed forks

    Hi just wondering if anyone could help me I’ve got a husaberg te 300 2013. With wp closed cartridge forks. I done a hare and hounds and blow a seal. I’m happy to replace the seal and I know the capacity is 607ml but would anyone be able to tell me how much in the bottom and top of the cartridge...
  3. B

    WP Closed Cartrige oil change

    I have a 2011 FE 570S. It has WP Closed Cartridge. Had the suspension lowered about three years ago. Probably time to change the fork oil. Do I need to change oil in the closed cartridge, or can I just change oil in the sliding tube/ spring chamber. Thanks
  4. Taffy

    Orebro is now closed

    Hello sad to say that the development shop in Orebro, Sweden (I think it was there?) was closed last week for Christmas and for the last time. I believe that all there lost their jobs. It was also where all the old Husaberg information was stored and so I'm not sure where all the old...
  5. N

    Tps setting closed throttle setting

    Hi i own a husaberg 570 FE 2012 i was experiencing alot of flame outs and under power issues long story short it turns out the tps was out of adjustment using a multimeter i checked what it was set at it read .408v in the closed throttle position so i done alot of digging around to find...
  6. R

    Closed forks on 2011 FE570 harsh

    Anyone feeling a complete lack of plushness on their CC forks? I have what i believe is stock fe570, and have had to turn the comp all the way off to soften up the fork. There is a LOT of midstroke harshness in the fork. Anyone try lowering the outer oil level on these with any success? How...
  7. 2

    closed cartridge spring length

    can anyone tell me please on the new (012) closed cartridge fork is the spring length 450 or 485mm?...thanks
  8. C

    Training in a enduro closed circuit, Malpartida de Cáceres

    Hi everybody!!! The next 27th of november, there will be an amateur enduro race in a enduro closed circuit, called Las Arenas, in Malpartida de Cáceres. Because of that, last saturday i went with a few friends to that circuit to train it. We had a very good earth to ride and the stones were...
  9. S

    Closed Cartridge Impressions and Springs Question

    Hi: I just bought a 2011 Husaberg FE 450. I am thrilled and positively impressed with the new CC forks. They are way better. Much more precised that the OC forks. They are also smooth enough for enduros (I even had to stiffened them a little trought clicks - 8 clicks out instead of 12...
  10. F

    Closed Cartridge Forks vs Open

    Hi I am looking at buying a FE390. I have read in this forum that the 2011 model has Closed Cartridge Forks. Can someone please explain what the benefits over Open is, and is it worth me waiting for the 2011 model a couple of months away, or just get the 2010. Thanx in advance Fizz
  11. L

    Cutting out on rolling throttle closed

    2002FS650e starts okay on kickstart and idles at around 1500rpm but seems to have an annoying problem that when I roll the throttle towards closed to slow for a corner the engine seems to cut out. When I open the throttle again I can hear the exhaust note change but it's still not firing. It...
  12. hus362

    Jumps from closed throttle

    I have been trying to diagnose a problem with my 97 501FE. I've only had the bike for about 6 months and I'm slowly sorting through various small stuff before I take it out for some remote area woods riding. In short, it is very difficult to control off of closed throttle. It feels like...
  13. fe600racer

    throttle closed revs die slowly

    Hi guys any advice. On my 1999fee berg when I shut the throttle (round slide dellorto) the revs take a while to slow down. This is a new problem. The idle is good when it gets there. The valves are adjusted right. I know idle can change which is a sign of tight valves, but this is perfect...
Back
Top