clean

Selling this super clean 501. Barn find. I have the clear title, comes with the original backpack, hat, tool kit, spare graphics, and what I think is a fender bag or other pack. Never opened it. Runs great. It had about 4 rides on it. I cleaned the carb, new plug, new air filter, oil and...

Evening all, hope you are well. I am in need of a little info and help. I posted an intro a while back and I am now in the process of restoring a 1991 FE350. I believe I have WP4054 MXMA forks but have attached a photo just in case. These forks haven't been touched for at least 15 years. What...

Skate bearings generally last a long time and require little maintenance. If you ride them in the rain or through some puddles then it might be a good idea afterwards to give them a strip and regrease just to stop them rusting too fast. Many people keep an old knackered set of bearings...

Skate bearings generally last a long time and require little maintenance. If you ride them in the rain or through some puddles then it might be a good idea afterwards to give them a strip and regrease just to stop them rusting too fast. Many people keep an old knackered set of bearings...

My exhaust is looking so crappy. Anyone know if there is something I can clean it with? Tried to scrape it with my nails, but it dident go away. Would be awesome to get it nice and clean.

My 650 has sat in the garage for a while with old gas in the tank. I drained the tank and want to clean out the carb. What's the best way to clean it out without pulling it out of the bike? Thanks, Mike

Here is a picture. http://imageshack.us/photo/my-images/818/imag0111v.jpg/ Full of dirt inside, if i remove the carb tube and the tube that goes down to the engine Can i just flush it with water? Or Will i get water somewere else where i dont want it then. Bought the bike yesterday, only had...

what part(s) to clean? just the cap, or also the plastic thing after the pump?

What can i use to clean headers, pipe; they're rusting! it's a 2008 550.

1-Start the bike 2-Let it run in idle for a couple minutes 3-Turn off the bike 4-Spray oven cleaner 5-Wait 5 minutes 6-Clean with damp towel 7-Redo steps 1 to 6 a second time 8-Wipe hard with dry towel 9-Wash the bike to remove all cleaner from plastics Voila. Of course, do...

I use a product called S-100 and I like it very well. The problem is that it costs about $11 for a 20oz bottle. The nice thing is that you can spray it on the engine and all the dirt and grime rinses away with almost no scrubbing. Does something like Simple Green work just as well. I don't...

isn't there a little valve or gate in the engine that you can clean. i would check the old archives again but, well, they're gone! it was one that simon used to cover a bit. Taffy