clamps

I want to have a 200mm Triple Crown on my FS 650. Original are 190mm between the fork legs. Which options do I have? Is there something from KTM which is a direct bolt on?

Looking for stock bar clamps for FE570.

Does anyone know if the triple clamps are the same on 2004 bikes? Looking for some for my fe450, found some on ebay that say will fit all 2004 to 2008 models Thanks

I just got a brembo front caliper with which 2014- husqis are equipped. Mount it was easy but accidentaly the way of the fitting process was clean, no spokes... till the wheel (16,5) turned. The neg. clearence is too big to compensate it with washers and/or make it true to the side a bit (which...

I got this important piece of the puzzle today for a future supermoto conversion of my 07 FE550. 17mm Offset Triple Clamps pollo

Hey guys, Just picked up my first Husaberg, its a '08 FE550. I love it! but I let my buddy take it for a spin and he put it into a concrete wall and it ripped the top triple clamp apart and sheared the stem bolt right off! I was wondering what my options are for replacing the triple clamps...

does anyone know if the blue husaberg triple clamps fit on the WP forks of a 2008 FE650 ? Part Number: 8120109902268 if they fit ill get them whilst they are still available. thanks!

I got my triple clamps today. Yes they still make them upon demand. Trick billet adjustable clamps. Im very happy about it. Part number for bottom ending in 016 and top 017. They both are stamped with 017 ending. Very cool. I imagine since they have the adjustable stem they are set at 16 with...

Looking for blue clamps for my bike. Part numbers are: 800.01.132.017 + 800.01.034.117 EDIT: DELETE... bought ktm smr clamps.

Hello i have. A 99 fc 501 i just bought 1 1/8 pro taper bars and clamps my problem is the clamp posts for the 1 1/8 bars is a bigger diameter than the stock so it won't fit can i drill the holes out too the right size ? Is there another tripple clamp i can use that will fit. Any help would be...

I am looking for 22mm triple clamps for my 09 FE450. I have found the adjustable 19/22mm ones on-line, but would like a pair fixed at 22mm. Hopefully, these would be priced less than the $564 I have found the adjustable ones on-line for. Thanks

Hi, I have FS some parts from my 570 Husaberg. WP 48mm forks made for supermoto - I will add spare springs for MX/enduro.. 350EUR WP PDS (only for 09-12 Husabergs) made for supermoto - I will add spare spring for MX/enduro.. 350EUR GDS triple clamps 14mm.. 220EUR Akrapovic silencer -...

G'day, I have a 04 FS650 with the 22mm offset triple clamps and I was hoping to get a set of 16mm clamps from a 05+ model. Finding a set is near impossible but there are plenty of 2nd hand KTM clamps around. 18mm KTM clamps would be a good compromise if they fit. My Husaberg clamps look the same...

equipping a 2012 FE570 as an adventure bike but also for gnarly dirt rides. haven't touched a thing on the bike as it handles in dirt so well, but it pretty twitchy at highway speeds. the forks sit above the top of the triple clamps by about 5mm, i'm going to drop them to so they sit flush, in...

Hi, I have a 2012 FE390, I am very disappointed that the triple clamps twist so easy? I was riding on the weekend and it was very soft sand, and i stalled and fell/dropped the bike due to my midget legs. I Picked the bike up and managed to get onto the dirt road and the triple clamps were...

I don't know if this has been covered before, but I felt compelled to tell other husaberg owners. My bike is an fs570 , 6 months old and 620miles on the clock, after going for a spirited ride I ended up at a local bike meet, and while chatting to a fellow enthusiast I noticed that one of my...

anyone know if theres offset clamps that fit a 02 berg sm ? or if late bergs wil fit or will any ktm ones cross over ??? i want my berg to turn in quicker suspension all set up nice . but even with the pegs on the floor i end up going the longway round ??

having had a few rides now on the 570 and raced it 4 times as well I can't see how the clamps need to be anything but the 18-20s that are in there. the bike will only fall at a certain speed due to its mass. it may over steer with the smaller bikes and 20-22s be better but with my 570 the...

does anyone know where you can buy the front-of-bar clamps for hanguards that have a fat bar/pro taper size bar? they seem so expensive! some do a kind of pinch clamp but I need a front end on bolt-in job like the acerbis? 30-35 quid in the UK. ouch! regards Taffy

Do they make, much difference to the handling of the newbergs I've got the 09 450 and have been offered a set of 22mm clamps at the right money